Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

You would cry if you weren't laughing so loud...

Posts

You would cry if you weren't laughing so loud...

#1

You would cry if you weren't laughing so loud...

Jim Rutten

>I keep a couple bottles of CA glue up on a end table beside my chair in the living room for small everyday type of fixes. Somehow, one of these leaked and now the table look like a still life with, but not limited to, the two CA bottles, a software package, some assorted and sundry papers, and a bottle cap permanently fused to our table. Besides cornering the local market on finger nail polish remover, do you have any suggestions for clean up?

Re: You would cry if you weren't laughing so loud...

#2

Re: You would cry if you weren't laughing so loud.

Ken Oakley-Sunny St. Cloud,Fla

>Napalm????

Re: You would cry if you weren't laughing so loud...

#3

Ken, that was perfect...thanks for the laugh

Thad------WebKitFormBoundary2MUKv+qM98ILr0mA

>

Re: You would cry if you weren't laughing so loud...

#4

Display it as a collage! ;>)

GalenV in Iowa

>

Re: You would cry if you weren't laughing so loud...

#5

Re: You would cry if you weren't laughing so loud.

charlie belden

>I've CA glued my thumb to my forefinger, my finger to a pearl, my finger to a feather and a finger to a Magic Wand. Hadn't consider getting me out of the picture and just doing Still Life stuff.

It's so easy to misplace/lose things. The idea of glueing them down so they can't run off and hide never occured to me. You're a genius.

If there's a wife in this scenario I think unsticking everything is the least of your problems because you know that by now she's told everyone she knows, and probably the guy in front of her at the supermarket, about your latest achievement. The gals will fall on the floor in hysterics and share their husbands' achievements while the guys will give a fake smile to be polite - and thank their lucky stars that they haven't done THAT - yet.

If it's any consolation, someone here or over in the usnet newsgroup rec.woodworking shared an achievement that easily tops yours. It involved CA glue being used in a bathroom project, a spill and clean up, followed immediately by "relieving" himself.

At least the UNDO for your achievement won't involve the loss of any skin - on any "tender parts" - so count your blessings.

As for separating CA glued things - if both contact surfaces are smooth and solid - a sharp wrap with a mallet or hammer parallel to the joined surfaces may do it - probably taking some of the finish of the table top with it. They also sell a CA glue softener - which is probably acetone - but with glued friction fits - it's useless (don't ask me how I know this).

My suggestion is to get a new end table, paint your creation, maybe do some carving and texturing first, and gold foil a few areas for a bit of bling. Then come up with an interesting title for your new creation, find a prominent place to display it and install special lighting to really show it off.

Congratulations!

You're an artist!

(And you probably are one of those folks who thought "I'm Just Not Very Creative.")

Re: You would cry if you weren't laughing so loud...

#6

Mike Stafford

This is art!!!

Mike Stafford

>Cut the legs off at an angle so the table sits unlevel and enter it in an art show in the mixed media category. Sure winner. Glue a few rusty nails sticking out of it at odd angles. That will help give the piece authenticity.

Oh, and wear a beret to the exhibit opening when you collect your prize....

Buy a new end table with the prize money to make the wife happy.

Re: You would cry if you weren't laughing so loud...

#7

Re: This is art!!!

Lan Brady

>I don't kow about the art stuff.

But, you will never be able to say "Honey, where is my CA Glue?"

Thanks for the laugh of the day, Lan

Re: You would cry if you weren't laughing so loud...

#8

Re: You would cry if you weren't laughing so loud.

Adrien's SWMBO

>My husband share this posting with me and I am still laughing at the comments. As a spouse, I would really like to see a picture of that still life. You may also want to enlarge the picture, have it framed...that way there will always be a visual to go with the story.

Re: You would cry if you weren't laughing so loud...

#9

Mine is not as good, but the punishment fit ..

Barry Irby

>the crime.

I have a drawer in my lathe cabinet that holds all my little parts. Jacobs chuck, Allen wrenches, diamond hone, pin vice, chuck jaws, extra screws, AND accelerant and CA. A bottle of CA leaked and glues everything in place. Not sure if I damaged it with a sharp object or it just leaked. Sure cut down on the rattling when I open the drawer.

Re: You would cry if you weren't laughing so loud...

#10

Re: You would cry if you weren't laughing so loud.

John K Jordan

>No suggestions for cleanup, but thanks for the reminder. My bottles stay in the door of the garage fridge. I think I'll look for a bin of some sort to contain any leakage. I don't know why I've never had any leaks - the bottles keep for so many years in the fridge I've had a plastic bottle degrade and crack.

Did manage to glue both of my hands to a vacuum cleaner handle under repair recently, and this was the day after the demonstrator at our turning club reminded us of the hazard and had his own story about CA and the undertakers assistant.

JKJ