John Lucas
Jorge Castaneda~Downeast Maine
>John,
Check this out, this spanish fellow making segment turnings..:
http://foromaderatorneada.com/viewtopic.php?f=1&t=2095&p=11704#p11704
incredible!
Jorge
Knowledge You Can Build On — Est. 1998
John Lucas
Jorge Castaneda~Downeast Maine
>John,
Check this out, this spanish fellow making segment turnings..:
http://foromaderatorneada.com/viewtopic.php?f=1&t=2095&p=11704#p11704
incredible!
Jorge
Re: John Lucas
Tery Scott
>what do you think the material is
Re: John Lucas
john lucas
>Wow that's cool. It looks like it might be some sort of plywood or something. There is a layer with straight grain on the top and bottom. If it's truely segmented then I am utterly amazed. I might be able to do 8 segments that small by building a jig similar to what the fly rod makers use. I'm pretty sure I would not be able to do it on my table saw as the accuracy isn't there.
Thanks for posting.
Amazing.....
Barry Irby
>Who knew they had coins over a foot in diameter?
link *LINK*
John Lucas
>
http://foromaderatorneada.com/viewtopic.php?f=1&t=2095&p=11704#p11704
Re: John Lucas
Jorge Castaneda~Downeast Maine
>Tery,
He says right on the post: the body is olive, the segments, 64 of them are walnut and maple and the top and bottom of the segments, the continues pieces are cherry. but he does not explain how he did it. Maybe he started with veneer? I could ask if anybody is interested.
He also states that this is the first and last, he just do not have the patience. Obviously he is not lacking in skills...
Re: John Lucas
John Lucas
>That's a really odd number of segments. If you don't count the top and bottom there are 6 layers. I can't divide that into 64 and come out even. Doesn't matter. If it was done by hand you could easily have an odd number of segments in a ring.
Now I'm going to have to try and do one.