Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

How many Chucks do you own

Posts

How many Chucks do you own

#1

How many Chucks do you own

Tery Scott

>How many Chucks and face plates do you own

This idea came about because Teknatool recently did a survey on what gear turners were using and they were staggered by the amount of chucks people owned

just a bit of fun here for the toolaholics

what brands of chucks do you own and prefer what jaws do you have on each

A mate in our club came to me last night and said he has talked his Wife into buying him a large vicmarc chuck with 180mm jaws for xmas he already has 13 tecknatool chucks

He is not alone as another member admitted to having 14 as well

I am just wondering how I can con my wife so I can match their stable numbers . At least i have an excuse and have 2 lathes with different threads

My tally is 12 face plates and 12 Teknatool chucks of differnt variates and one large Vicmark As I leave my work in the chuck until completion and I use the pro mount carving stand mounting is a breeze. Another excuse is I am often working on two lathes building one piece for example a lidded box is easier doing the base and the lid on 2 lathes I dont know what happens but taking a chuck off a lathe and then replacing it never seems to run true as it must seat differently

I will be interested to hear what comes out of this thread

Re: How many Chucks do you own

#2

Re: How many Chucks do you own

Jorge Castaneda~Downeast Maine

>Terry,

I own 4 chucks and I am thinking of getting another.

One Vicmarc,I use that one for small work as well as my bowls and platters, mostly with the standard jaws, although I have four set for it, one Stronghold, I have a Number 1 set of jaws, also a number 2 and my work horse, a number 3 tower jaws, I have 2 lathes, I want one of this chucks on each; and two Supernova with 5 sets of jaws.

I also have a dozen faceplates.

another tool junkie...

Jorge

Re: How many Chucks do you own

#3

Jesper, Denmark

Re: How many Chucks do you own

Jesper, Denmark

>Two Oneway Strongholds, one with Jumbo jaws permanently mounted and one with mostly #2 jaws.

Three faceplates, but mostly use the 4" Oneway.

One nota about the Strongholds: there is a gap in the diameters the #2 and #3 can handle, so measure carefully befor you turn a foot with a diameter in the gap.

Re: How many Chucks do you own

#4

Re: How many Chucks do you own

Barbara Gill, Remlik VA

>Two, a Oneway Stronghold and a Oneway Talon. Two Faceplates, The 4" Oneway that came with my lathe and a 6".

Re: How many Chucks do you own

#5

JL

Re: How many Chucks do you own

JL

>Two face plates.

Two chucks (Stronghold and smaller Tommy bar chuck). Would like another.

Re: How many Chucks do you own

#6

Re: How many Chucks do you own

Randy Johnson

>One super nova that I bought at the same time I bought the lathe. At the present time I have three sets of jaws that I switch back and forth as needed. It's kind of a pain, but not so much that I'm willing to shell out for a few extra chuck bodies right now. A selection of different jam chucks that screw onto the spindle as opposed to being mounted on a face plate or a four jaw chuck. Two different sizes of donut chucks. Three faceplates counting the one that came with the lathe. I plan to try my hand at making a few more faceplates. If I'm happy with the result I'll never buy another one.

Re: How many Chucks do you own

#7

Mike Stafford

Re: How many Chucks do you own

Mike Stafford

>You have me beat Terry. I only have 10 chucks....Only 10.

I have an original Nova with the tommy bars, a SuperNova and 4 Supernova II's. Then I have two Vicmarc 100's and two Axminsters.

I have all of the Nova jaws. I won a contest with them a while back and got my choice of 5 sets of jaws which helped me complete my inventory. I bought the Original Nova new as my first chuck on a close out deal and then I bought a SuperNova II new but the rest of the SuperNova II's were bought used. I found one at a yardsale still in the box and had to pay the exorbitant prices of $25.

I bought one Vicmarc new and one used. I only have 5 sets of jaws for the Vicmarcs.

Both of my Axminsters were bought used from the same guy at the same time and came with 10 sets of jaws. That whole deal was only $450 which I think was a steal because the Axminsters are wonderful chucks. However they are the only chucks I have that do not have a retaining pin that prevents the user from overextending the jaws outside the body and flying off. They are very heavy chucks and I would not recommend them for mini-lathes.

Why so many? I turn lots of boxes at one time and finish them all through the same stage. Having a lot of chucks lets the finish cure at the various stages and I don't have to take off the box and rechuck.

Heck, if I can find some more deals I will buy some more chucks.

Re: How many Chucks do you own

#8

Re: How many Chucks do you own

john lucas

>Gosh I almost feel like the poor kid on the block with 4 chucks. I have an original Nova with 3 sets of jaws. I don't use it much anymore and want to replace it with another Vicmarc 100.

I have 2 vicmarc 100's and the grizzly copy. I'm going to buy another vicmarc when I get the money as I seem to be constantly needed one with normal set of jaws. I have 5 sets of jaws but I virtually never use the set that has 3 dovetails on one set. I thought it would fill some of the gaps I have but it doesn't.

I have tons of faceplates. I've never counted but probably a dozen or more. Many have scrap of various sizes already attached so it's very quick to glue or attach something to them if I need them. Since I can build my own using big washers and nuts it's not problem to have custom made jigs laying around with faceplates already attached.

I also have lots of vacuum chucks in many different sizes. Those get used a lot.

Re: How many Chucks do you own

#9

Eduardo Sarmiento

Re: How many Chucks do you own

Eduardo Sarmiento

>I have two,a super nova2 and a old sorbys precision chuck that chuck I had for 20 years still going strong,have all the jaws and acc for it,dont use much this days but it sure comes in handy when need a pin or other weirds ways of holding wood

Re: How many Chucks do you own

#10

Re: How many Chucks do you own

Jeff Willaford

>Only three chucks but Christmas is coming. Standard Nova w/bar and spanner, G3 and SN2. Jaws 50mm, 75mm and 1 inch. All tend to get used frequently. One faceplate ring and 3 other faceplates mostly small.

Re: How many Chucks do you own

#11

Bill Blasic

Re: How many Chucks do you own

Bill Blasic

>I have 14 Nova chucks, Titan, SN, SN2's, G3's, Precision Midi's and original midi. I just purchased an original from Tim Geist in 3/4-16 thread for a gift to my neighbor (and I'm pretty sure there is a handle and a gouge in his gift bag - he's always there when I need a hand). I have used all the major brands and find no fault with any of the three major brands, they do the job.

Bill

Re: How many Chucks do you own

#12

Re: How many Chucks do you own

Ed Moore in SW VA

>I'll fess up to having 8 chucks. Three Vicmarc VM100's, which are my go-to chucks, two VM120's for the Robust lathe. I have two Talon's and a Oneway also. On the VM100's I keep #2, pin jaws, and shark jaws.

I like VM100's and have started a drive to get them with #2 and pin jaws for the John C Campbell Folk School. Teaching ornaments is a lot easier when you have good chucks.

I have considered getting a mini-chuck from Penn State, but I can't remember why. I think it was for the Jet 1220, which is my demo lathe.

Respect the bandsaw,

Ed

Re: How many Chucks do you own

#13

Re: How many Chucks do you own

Barry Irby

>I have three Nova chucks, two Super Nova and one with the tommy bars, (didn't know there was going to be a quiz and I would need to know the names). The one with the tommy bars has Cole Jaws on it permanently and I made a set of hooks that extend them to 16". I bought one of the Super Nova's from somebody selling seconds or refurbished ones. I have about half a dozen faceplates. I have two vacuum chucks and a bunch of homemade wooden faceplates that have a No 2 morse taper turned on them (very useful for gluing small item to them and then turning them away.) I've lost track of the jaws, but I wish I had a five or six inch set if such exists. I also have two jacobs chucks on morse tapers.

Re: How many Chucks do you own

#14

Re: How many Chucks do you own

Carole Valentine

>Gosh, can't remember...five I think. Three supernovas and two of the smaller Nova's for the Jet mini. Numerous faceplates and a faceplate ring. I love the rings, BTW. If I should come across a "deal" on another Supernova and have the cash, I will probably buy another. Ideally I would like to have a chuck for every set of jaws since I don't like changing jaws! How's that for lazy? There is one drawback to doing that though...if you never change out the jaws, and then find that you do need to do it for some reason, the screws can get frozen (particularly if you have been turning wet wood) and be a hassle to get loose. I use a dry lube now when I first put them in.

Re: How many Chucks do you own

#15

Steven Antonucci

Chucks should equal jaw sets

steve antonucci

>Doesn't make sense to have more bodies than jaw sets. I have 4 jaw sets and 2 bodies, and one chuck permanently sports cole jaws for finishing the bottoms of bowls (which I rarely turn anymore).

I have 4 faceplates, 2 of which are dedicated to fixtures, and two that I'll occasionally use to fix work.

S

Re: How many Chucks do you own

#16

Dick Hines

Re: Chucks should equal jaw sets

Dick Hines

>I have 5 Nova's and 4 seldom used face plates. The chucks are set up with the jaws I use all the time. My go to chuck is the Nova 2 with 75MM jaws. One Nova it the Titon , I think, it's a big McDaddy chuck with powergrip jaws. There are also 2 of the old Novas, one with dovetail jaws and one with pin jaws. And for my Mini Jet I have a chuck with the tommy bars and a third arm to hold things while I tighten the jaws.

Can't remember the last time I used one of the face plates.

Re: How many Chucks do you own

#17

Re: How many Chucks do you own

Cyril Griesbach

>I've got six Novas and most of the jaw sets including the power jaws and cole jaws, several vac chucks, a set of collet chucks. Face plates abound in the shop including those from PM, Oneway and others as well as many made with the Beal Tap.

Re: How many Chucks do you own

#18

Re: How many Chucks do you own

Emmett Manley, Lakeland, TN------WebKitFormBoundar

>I have three Talon chucks, so to have immediate access to #1, #2, and #3 jaws. In addition, I have a Glaser screw chuck which gets a lot of use. I believe I have two faceplates, but they are fixed to wooden disks with sandpaper attached (my disk sanders).

Re: How many Chucks do you own

#19

George Taylor

Re: How many Chucks do you own

George Taylor

>2 - SuperNova

1 - Nova midi

2 - face plates

1 - Beall collet

1 - drill chuck

Re: How many Chucks do you own

#20

Re: How many Chucks do you own

Don Orr

>Let's see-I think I have 3 of the "original" Nova chucks-1 w/standard jaws, 1 w/small jaws, & 1 w/an eccentric adapter. I have 3 Talons-1 w/ Jumbo jaws, 1 w/#2 jaws for the mini, and 1 w/#2 jaws for the big lathe. I have 1 Stronghold w/#2 jaws for the big lathe. I also have a mini chuck w/ 3/4" x 16tpi thread for my old Craftsman lathe that I will be using eventually on my FIL's old Craftsman. It has several jaw sets. That should be it-for now ;-))

The real answer to the original question is "Not Enough" . I'd like a chuck for my big lathe with small jaws so I don't have to use the thread adapter to use the one from the mini.

Re: How many Chucks do you own

#21

Man, I'm a lame duck!!

Greg Haugen

>Man, am I a lame duck compared to the rest of you. I have a big whopping TWO oneway talons, and three sets of jaws #1-#3. I have one faceplate, that came with the lathe or I probably wouldn't have that. I don't use faceplates unless I'm making up a vacuum system and I'll use it to make a "vacuum" chuck/bell. I learned to turn bowls by Mahoney's DVD and have always used the Woodworm screws. I can count my "hollow forms" on one hand. If I did more of them I know I would have more faceplates.

Re: How many Chucks do you own

#22

you might be eligable for stimulus money to

John Lucas

>buy more chucks. You are clearly on the short end of this. :)

Re: How many Chucks do you own

#23

LOL!! The "chuck stimulus" package :-)

Greg Haugen

>

Re: How many Chucks do you own

#24

Re: a lamer duck

Carol Reed - home in Strawberry

>2, Talon, and SN2, and no extra jaws.

Uhhmmmm....Santa, could we have a word....???

Re: How many Chucks do you own

#25

At least I'm in great company. :-)

Greg Haugen

>