Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Bottle Stopper Skew Practice

Posts

Bottle Stopper Skew Practice

#1

Bottle Stopper Skew Practice

Ken Bellock (Houston, TX)

>Last night I turned this stopper to give away today at a work gift exchange. I'm still very much a beginner so up till now I have really only made dust and chips. After reading a few tips in Raffan's book, I was able to make some real pretty shavings with my freshly sharpened skew. It was the first time I finished something without touching sandpaper. It's not perfect, you can still see some tooling marks, but I was very happy, and had a hoot watching those shavings come off. I will need to put an order in soon for some more of those stoppers from Ruth Niles soon.

Ken


img

Re: Bottle Stopper Skew Practice

#2

Re: Bottle Stopper Skew Practice

John Lucas

>Ken Good job. Glad our learning to use the skew. Don't rule out sandpaper however. Proper cutting with sharp tools only changes where you start on the sandpaper race. Instead of 80 grit you might be able to start with 220.

Re: Bottle Stopper Skew Practice

#3

Re: Bottle Stopper Skew Practice

Greg Haugen

>Nice job!! Once you learn to use the skew you can take what you've learned and apply it to almost any tool in turning. I do agree with John on sanding, just start at a higher grit.

Nice work, keep it coming.

Greg H.

Re: Bottle Stopper Skew Practice

#4

Why not make it more perfect...

JackSavona

>...by using some sandpaper? The skew scares SO many turners. If you can use the tool comfortably and skillfully, why not use the sandpaper to make it 'perfect'? If YOU can see the tool marks, then so can others. Why not get rid of them? As the stopper sits on the top of the wine bottle, you want people to see the beauty of the stopper top, not its tool marks.

Go for the gold! You're SO close.

Re: Bottle Stopper Skew Practice

#5

Re: Why not make it more perfect...

Ken Bellock (Houston, TX)

>Will do. I have three more to do by the end of the weekend, and the one in this picture was just practice before I started on the cocobolo blank sitting next to the lathe. The one I posted here was intended to be a good bit longer, and wider at the top, but there were a couple pretty good catches that forced design changes. My goal for the next three is no tool marks and a consistent texture across the whole piece after finishing. I have a plethora of sandpaper, cloth backed, psa backed, string, from 80 grit to .5 micron. I am a perfectionist, and will have no toolmarks soon, but with this piece I was just very happy that with the better technique and added practice with the skew I could have started a little higher than the 80 grit! The only part I could not make the tool marks completely dissapear from was the inside of the cove. Is this where it would come in handy to grind a slight curve on the skew, or will just more practice take care of it?

Pictures of the next stoppers will follow...

Re: Bottle Stopper Skew Practice

#6

Re: Why not make it more perfect...

Greg Haugen

>Ken, what kind of skew are you using (brand, profile-oval or rectangular, and size)? If you're using an oval, a straight angle is most often used. If you're using a rectangular profile skew, it's personal choice. There's advantages to both. I have both and use both. I use a radiused angle (lacer/raffan grind) a lot, partially because it's easy to do a peeling cut for waste removal and I'm used to it. Also for some figured woods, or a piece with a knot where the grain is tighter, I usually get a better cut with a radiused than a straight angle.

The best way to answer that question is this, find someone near to you that has a radiused angle skew and try theirs before you potentially unnecessarily grind yours.

There's no right or wrong answer to this. One key element, straight or radius, the toe (long point) to the heel (short) still should be 70 degrees roughly.

Highly recommend Alan Lacer's DVD's on the skew-there's two. As well as Jet Tools "Lathe" DVD. Nick Cook is the turner and he has some great tips and projects on it for the skew. The jet DVD will cost around $8-$12 bucks only.

Hope that helps.

Greg H.

Re: Bottle Stopper Skew Practice

#7

Keith Tompkins

Re: Why not make it more perfect...

Keith Tompkins

>HI Ken, Nice. You're on the right track by learning the skew. Remember, each tool has operations they are good at. the skew is good for planing cuts and beads, but other tools are better at coves. A spindle gouge will cut a clean cove than requires little or no sanding. While the skew CAN cut a cove, it's not the best tool for the job.

Re: Bottle Stopper Skew Practice

#8

Re: Bottle Stopper Skew Practice

charlie belden

>Oak, with its open grain probably isn't the best choice for a stopper, nor the easiest wood to turn with a skew. But if you CAN turn it with a skew, maple and other woods will be like turning butter - cold firm butter - but not totally frozen butter - more like a firm cheese - not a runny cheese like Brie - chedder - like turning chedder - but not like KRAFT Cheese - the kind that come individually wrapped in plastic and looks - and sort of tastes like plastic . . .

Sorry - ADD.

Nice early results with a skew. Now for some crispness and details a skew lends itself to?

Re: Bottle Stopper Skew Practice

#9

Re: Why not make it more perfect...

john lucas

>I agree with Kieth. I have done quite a bit practice cutting coves with a skew. It was sort of like your mother telling you not to do something, you just gotta try it don't you. Well turning coves with a skew was like that for me. People told me not to do it so, well you know. I use some unusual techniques and I have a slew ground with a 90 degree included angle so that the bevel is very short. This allows me to cut steeper coves with the skew.

That being said I cut my coves with a spindle gouge. This is what they work best at and I find it hard not to use them for that. It takes a little practice to get as clean of a cut on a cove with a spindle gouge as the flat areas cut with the skew but not much.

Keep practicing with the skew but recognize that it is not the best tool for everything.

Re: Bottle Stopper Skew Practice

#10

Re: Bottle Stopper Skew Practice

John K Jordan

>Hey Ken. I'm glad you are learning the skew. When I started turning almost everyone told me to stay far, far away from the evil skew, it was only good for opening cans of paint, etc. I decided right away I would learn the skew even if it bit me (a stubborn streak I guess) so I jumped right in. Today the skew is just about my favorite tool! Much of my smaller work is done with a 1/2" and I've started using a 1/4".

As for turning without sandpaper, I found the type of wood makes a huge difference. I've turned many things with either no sanding or starting with 600 or 400. However, I'd have trouble with an open-grained wood. It's goes a lot smoother (pun intended) with hard, dense tropical woods like ebony or cocobolo. And as mentioned, a small detail gouge on the coves will be cleaner.

JKJ

Re: Bottle Stopper Skew Practice

#11

Re: Bottle Stopper Skew Practice

Tery Scott

>I suspect you may have to get a batch of stoppers quickly as at work you will have orders flying in

well done ,I also agree with John Its the overall finish that sells

Cheers

Re: Bottle Stopper Skew Practice

#13

Re: Bottle Stopper Skew Practice

Ken Bellock (Houston, TX)

>I just happened to have some scrap red oak laying about from a small chest I am making, so that was really intended to be practiced on before I used the more expensive cocobolo I had ready. It does force me to do things right though, if I'm scraping instead of cutting, it tears out pretty fierce. I also wanted to practice more with oak since I have a couple chunks of oak burl I cut off a huge tree that went through a friends house here in Houston during Ike. Figure the tree could give them back something nice after causing all that damage.

Didn't get a chance last night, but will definitely be back to it once I break free of the office.

Re: Bottle Stopper Skew Practice

#14

Re: Bottle Stopper Skew Practice

Ken Bellock (Houston, TX)

>Actually it was recieved with very little fanfare... The woman who got it is a wine drinker, but she just picked it up and said, "oh, a bottle stopper" and put it back down. When she noticed the note inside that laid out what it was turned from, how it was finished, its name, number and my signiture, she realized that I hadn't purchased the thing at walgreens 30 min before the gift exchange like the other half of the people in the group did. The gift I recieved at the exchange was two packages of wet wipes... no joking... Tis the season for giving though, not recieving, and I had fun making the stopper. The other two stoppers I have to make by this weekend will be going to friends who know what my hobbies are. They will be much more loved I believe, which is why the cocobolo goes on the lathe for at least one of them.