Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Spot the Wave

Posts

Spot the Wave

#1

Spot the Wave

Tery Scott

>Ancient kauri once again 600mm square textured dot by dot with a Dremel copper leaf applied then various milk paints then sand blasted through the layers of paint ,which had 2 coats of each color and let to dry in between

sold to Collector in Hawaii

Comments welcome

More in this series can be seen under winged bowls in my web site

Cheers


img

Re: Spot the Wave

#2

Re: Spot the Wave

Don Evans

>Excellent as usual Tery. What do you use in a case like this as your sandblasting medium? I would go with glass or walnut, do you have a different option over there? I guess one could use the old reliable alum oxide also.

Don

Re: Spot the Wave

#3

Re: Spot the Wave

GaryG in MD

>Nice work, Terry. Interesting to hear your order of operations. I like the contrast between the exterior and the beautiful wood interior -- nice undercut too. ...Gary

Re: Spot the Wave

#4

Re: Spot the Wave

Tery Scott

>I did use silica but have just changed to glass

I have a real problem in that my 16 cfm compressor wont keep up and I dont have three phase This is the biggest I can run single phase

It takes forever to blast anything

Thats for taking the time to comment

Re: Spot the Wave

#5

Re: Spot the Wave

Tery Scott

>Thanks Gary

Re: Spot the Wave

#6

Re: Spot the Wave

Don Evans

>I would think that 16 cfm would be ok, I wonder if your problem isn't the size of your tank? I don't have a problem with my compressor keeping up (it is 19 cfm) but it's 80 gallon tank. I'm also using a pressurized sandblasting tank, it's small which in our case is better.

Don

Re: Spot the Wave

#7

Re: Spot the Wave

Tery Scott

>Thanks I ll look into it