Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

nova mini chuck at woodcraft

Posts

nova mini chuck at woodcraft

#1

nova mini chuck at woodcraft

don lewonczyk

>Woodcraft has a nova mini chuck in their latest catalog on page 153, part number 150305 for $79.99. It has the 25mm & the 50mm jaws plus the wood worm screw. The shipping is free plus you get $10 off your total purchase, discount code 12249 until 12/24/09 so for $69.99 you have a nice little chuck 1"x8" with two sets of jaws for under $70.00 and shipped to you free. Yes, I ordered one to go with the one I already have,oh, the 25mm jaws sell for $37.99 by themselves. Deal or no deal that is the question? DonL

Re: nova mini chuck at woodcraft

#2

JL

"Tommy Bars"

JL

>I have a 2 lever chuck. I don't really mind them - in some instances, they work very well.

This chuck is a 2 lever chuck. I've got two hands. Sometimes it is difficult to hold the work piece and tighten the chuck jaws.

If you are aware of those possible problems, this is a great deal. I'd prefer a G3 myself.

Re: nova mini chuck at woodcraft

#3

Re: "Tommy Bars"

D. Hansen

>If your lathe has a spindle lock then you only need to use one of the levers like other chucks.

Re: nova mini chuck at woodcraft

#4

Re: "Tommy Bars"

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>Holding one of the bars down is why you have a beer belly.

Re: nova mini chuck at woodcraft

#5

Re: "Tommy Bars"

David Belser

>It's a good little chuck, but I started on an old Delta with no real spindle lock. They way I dealt with the Tommy bars was to choose two holes close enough together that I could wrap one hand around them (like one of those spring grip exercisers). Depending on which holes you choose, you can either open or close the chuck.

In retrospect, most of the trouble I had with this chuck was try to hold work that was too big/out of balance for the chuck/lathe combo.

It's a good chuck when used correctly.

Re: nova mini chuck at woodcraft

#6

Re: The ol' golf ball trick replaces the 3rd hand!

Jamie Donaldson

>

Re: nova mini chuck at woodcraft

#7

Re: The ol' golf ball trick replaces the 3rd hand!

don lewonczyk

>Jamie please expand on the ole golf ball trick. DonL

Re: nova mini chuck at woodcraft

#8

Re: Anyone who has seen me do demos.....

Jamie Donaldson

>...knows the golf ball instead of the third hand secret! I hollow out a cone shaped hole in a golf ball which fits over the nose of the tailstock live center. This allows cranking up the tailstock to hold the wood in the chuck jaws without locking the wood in place- the ball acts as a U joint.

Re: nova mini chuck at woodcraft

#9

About "Tommy Bars"

Thomas Skaggs, Foothills of Mount Level

>Here in the Foothills the best "Tommy Bar" is called "The Esquire Lounge". Excellent beer selection, nice pool tables and free peanuts...throw the shells on the floor. My kind of joint!

Tommy

Re: nova mini chuck at woodcraft

#10

Re: Anyone who has seen me do demos.....

don lewonczyk

>Thanks Jamie.

Re: nova mini chuck at woodcraft

#11

Re: "Tommy Bars"

charlie belden

>JL:

That was what I THOUGHT too. Then a friend showed me that you can hold the piece in the jaws - pressing into the jaws and use ONE tommy bar to "snug" up the jaws to the piece. THEN you can use two hands and two tommy bars to tighten things as much as you want.

Re: nova mini chuck at woodcraft

#12

Bill Blasic

Re: "Tommy Bars"

Bill Blasic

>Couldn't pass up that bargain last Saturday at the Cleveland Woodcraft. There is going to be a four jaw set coming soon that will fit that chuck among others. As far as Jamie's golf ball trick I made 35 that I passed out at our tips and tricks December meeting of the Presque Isle Woodturners and as Jamie states it works great and not only for tommy bar chucks. Jamie was well received at our club in November and if your looking for a great demo look him up.

Bill

Re: nova mini chuck at woodcraft

#13

Re: About "Tommy Bars"

charlie belden

>But you want to avoid bars with sawdust on the floor. It's there because the patrons are sloppy drunks. You can't get a good footing on sawdust so fist fights don't usually result in one or more people unconscious on the floor - and sawdust soaks up blood just like oil ; ).

REAL bars don't sell beer. REAL bars only serve liquor, straight up, with a splash of water or over ice - none of those little paper umbrellas or slices of lemon or orange.