>When I started turning, I think the major appeal was that I could go end to end in a single shop session (at least I perceived that I could). Now, even though my skills have improved and I can "finish" a project in a session, I find incomplete works piling up all over the garage (I mean, studio :-)
Do you work on one thing until completeion, or multiple project in parallel? I don't mean exclusively, but generally- one at a time vs. many balls in the air?
>I usually have multiple boxes underway at a given time with each being completed to the same point in the process. They don't get finished at exactly the same time but each step is completed in turn with multiple boxes.
>Steve with the limited time I have to turn I usually have 3 or 4 things going at once. Several in the finishing stages, some in glue up stages and some I simply do in stages such as ornaments and mirrors. I make like a dozen ornament balls and then I'll take a break from that and turn icicles. When I do production runs of mirrors it's the same thing only worse. I may have a dozen mirror heads but there will usually be in several stages with things glued into them, or waiting for some carving.
Of course there is almost always a bigger project that is in various planning or working stages.
I would really like to build and complete one project at a time. Sometimes I get to do that and it's very rewarding. The parallel practice is too much like work, trying to fit to many things on one day.
Just like right now. I just finished a photo shoot, I'm downloading the images which takes a few minutes so I answer the phone, wait on customers, and sneak a peek at WC, The AAW Forum and WOW.
>If I must finish a piece for a special reason (a commission deadline), I'll go start to finish, if I am to my own devices, I tend to work in batches, rough out the outside of a dozen bowls, then rough out the inside of same dozen, platters I go in small batches, 2 or 3, and all along, if find a piece of wood that looks great for a vase, I make a vase...
>I have some pieces that I started and I severely doubt that I will ever finish. Ideas that went nowhere, stuff that didn't work out as planned, stuff I still don't know what to do with it.
Seems that the norm is to work in parallel, but are you waiting for future inspiration, talent, or just lost interest in a project? How is it that we have more stuff in flux than finished?
>I have a few projects that got a start and are still on the shelves waiting for something to happen to them (who knows when that will happen). I have some projects that I started and just gave up on and will probably never pursue, but they're still on the shelves. I have a couple projects that are started that are waiting for the time I need to put into them.
Generally, I get started on a major project, and I persist till it is completed. That's the case right now. I am trying to complete a piece I want to submit to the Maple Medley exhibition for the next symposium. I have several other projects I'm itching to work on, but have to delay till I get this one done. It seems that I have a lot more ideas than the time to carry them out. Of course there are small projects that come up and demand being done sooner. Like the mold I completed for the glass blower and the dozen pepper mills that I'm turning for Xmas gifts.