Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Tried Something New

Posts

Tried Something New

#1

Tried Something New

Carl Barton

>As the ole saying going, "If at first you do not succeed, try, try try again." Well I tried twice now and I am still not succeeding, but I will keep trying. I was bored and wanted to try something new so I bought two of those US Flag pen kits. I read all I could on how to do it, several times. The first time I did it it was a total disaster, the second kit I was able to salvage the blue field with the stars, but the stripes blew up on me. I feel a little frustrated but I will try again soon, well at $40 a kit maybe not too soon. :)

I did not practice the number one rule for this project,patience. Next time instead of using a tool I will be using sandpaper to complete the kit, and stop allot more as I go along.

Thanks for listening.

Carl

Re: Tried Something New

#2

Keith Tompkins

Re: Tried Something New

Keith Tompkins

>Hi Carl, We've all been in your situation. Believe me, it will get better, and ruined projects will become few and far between. A suggestion, if you don't mind. Grab a piece of scrap wood, and practice making pens with it before you attempt your next expensive project. I don't know your skill level, but 2 X 4's make excellent practice...if the wood grain's torn out something's wrong with your technique or your tools are dull. A clean, smooth cut...you're ready for that new kit....good luck.

Re: Tried Something New

#3

Re: Tried Something New

Carl Barton

>Keith,

Thank you for your comments. I have been turning about three years now. Made about 100 pens to date now. I think the issue with this project was me just wanting to get this project done tooooo fast. It was an expensive lesson for me. It had been awhile since I had done a pen, I have been doing segmented bowls all summer, so I was a bit rusty on my pen making skills as well.

Carl

Re: Tried Something New

#4

Re: Tried Something New

Jerry Whitaker

>Carl, in my opinion, the best tool to use for these kinds of pens is the skew. Also, you have to use plenty of glue to make sure all the pieces are glued on every surface. I do leave the blanks a little proud of the bushings and apply some more glue, go back to the skew to get rid of the excess glue and then go to the sandpaper.

Re: Tried Something New

#5

Re: Tried Something New

Carl Barton

>Jerry,

Thank you for the advice. I will give it a try.

Carl