Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

Burl Turning by a novice

Posts

Burl Turning by a novice

#1

Burl Turning by a novice

Thomas Norton

>I am a woodworker but not a turner though I do have a lathe in my shop. Last year I cut a burl or "knob" off a log that was in my firewood pile. I have had it in the shop for 16 months +. I was thinking about doing something with it and could use some guidance as to how to mount it and what tools to use to turn it.

I have a short list of turning tools but would consider expanding.

Thanks in advance!

Re: Burl Turning by a novice

#2

Re: Burl Turning by a novice

John Lucas

>Burls can be turned so many different ways because they are shaped so many different ways. Send us a photo. Here is one example of what can be done. this was a very small limb burl.


img

Re: Burl Turning by a novice

#3

Re: Burl Turning by a novice

Carole Valentine

>A picture would be nice. You said a "knob"...is it in fact a true burl or a limb scar? Sometimes limb scars are mistaken for burls but there is big difference. Anyway, once we see what you've got, we may be better able to help.

Re: Burl Turning by a novice

#4

Re: Burl Turning by a novice

Tery Scott

>Email me a picture of the burl ,see next post for my contact details and id only be to happy to help if I can

cheers

Re: Burl Turning by a novice

#5

Re: Burl Turning by a novice

Carole Valentine

>Tom, Terry is the "Master of Mounting" - if there is a way to secure an odd chunk of wood on the lathe, he will find it! Take him up on his offer. :)

Re: Burl Turning by a novice

#6

Re: Burl Turning by a novice

Don Evans

>If I read you correctly, you've never turned anything before?

If this is correct, that piece of wood you describe is NOT the piece that you should start with.

Go to the AAW site and see if there is a turner or club close by and learn to turn and save that piece for latter.

Don