Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Spindle lock with knock out bar

Posts

Spindle lock with knock out bar

#1

Spindle lock with knock out bar

Stuart Johnson

>The Nova thread had several reference to using the knock out bar through the hand wheel to lock the spindle. Is this some thing special with the DVR? I have a Nova 3K and can't see how the spindle can be locked with the bar.

Re: Spindle lock with knock out bar

#2

Mike Mills

Re: Spindle lock with knock out bar

Mike Mills

>I have a Nova 1624 and use the knockout bar with the handwheel. My handwheel is from Nova and has a hole in it that you can slide the bar through. I just let the bar drop down and catch on the base of the lathe. I assume the handwheel for the 3K would be the same as the 1624.

Mike

Re: Spindle lock with knock out bar

#3

Well, duh. Thanks for not calling me an idiot.

Stuart Johnson

>I couldn't get my mind away from using the knock out bar as a knock out bar. I didn't even think about the holes. Now if I can just figure out which end of a screwdriver to use.

Re: Spindle lock with knock out bar

#4

Re: Well, duh. Thanks for not calling me an idiot.

John Cotten

>The square or star shaped end. The flat ones are only good for paint cans and spreading wood filler. 8^)