Epoxy gone bad, (again)
Mike Foster
>I tried removing the first epoxy fill that did not seem to set with a new batch. I used the microlite filler made for the epoxy, measured accurately and let it set for 4 days. Same problem. Slightly sticky epoxy, that did not sand, but smooged (technical term). So I decided that for whatever reason, my epoxy has gone bad. I removed it and retried the same fill with 5 minute epoxy. I am going to completely hide the epoxy with color, so the brown color of the epoxy doesn't matter. I found this epoxy sanded well and smoothed out as I wanted. One of the bottles of the T88 I had has been without a lid for quite a while (probably a year or 2). I figured it didn't really matter. The resin did get really thick, and would not pour. I have decrystallized the epoxy a few times, including just before my first attempt with it. I'm not sure that the long exposure to open air (oxygen) may have led to the problem. Anyway, I am going to junk the epoxy I have and get some new good epoxy. Anyone have a favorite that gets hard and sands well?



