Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

What a wrestling match!

Posts

What a wrestling match!

#1

What a wrestling match!

Marc Phillips

>15 1/2" red cedar bowl.... far and away the largest bowl I have attempted.

The tenon kept breaking off... 4 times! ... so I kept having to reverse it, turn a new tenon, start over... I can sure see the need for a much larger set of jaws for my chuck.

Anyway, I am feeling pretty good that I got this thing done at all... even buffing it was a chore!


img

Re: What a wrestling match!

#2

Re: What a wrestling match!

Sean Troy

>Looks like it was well worth the effort. A real beauty !

Re: What a wrestling match!

#3

Dick Hines

Re: What a wrestling match!

Dick Hines

>Cedar can be like that. That is another reasion I don't like turning it. The other is it makes me sneeze.

Great looking bowl. Good for you for hanging in there.

Re: What a wrestling match!

#4

Re: What a wrestling match!

Mike Foster

>Nice bowl. 15 1/2 inches is a respectable size. A variety of chucks and jaw sizes is always nice to allow for various methods of holding the wood.

Re: What a wrestling match!

#5

Re: What a wrestling match!

George Guadiane

>Sure looks like it was worth the effort!

NICE Bowl.

Re: What a wrestling match!

#6

Re: What a wrestling match!

jim miles - Charlote NC

>Glue block & faceplate ?

Re: What a wrestling match!

#7

Re: What a wrestling match!

Cyril Griesbach

>Nice bowl. Your diligence was rewarded.

Re: What a wrestling match!

#8

Re: What a wrestling match!

Marc Phillips

>No... I just kept reversing it, making another tenon, then reversing it again and carrying on!

There are lots of knots and inclusions and the foot area was pretty stringy so even going carefully the tenon would just snap off. I had the tailstock supporting it the whole time but it would still just snap off... the tenon was very small compared to the bowl, so a large set of bowl jaws for my chuck are in order.

Re: What a wrestling match!

#9

Lyle Jamieson

Re: What a wrestling match!

Lyle Jamieson

>A 5 or 6 inch glue block would solve the problems and stop all the vibration issues you must have encountered. Why pay more money for chuck jaws when they dont hold very well in the first place. Its not the chuck that fails, but you are grabbing a sponge. The soft wood of cedar will compress significantly and fail to get a good transfer of power to the wood.

With a 6 inch diameter glue block you could finish the outside shape and do the inside without the tailstock in the way, and use 99 percent of the depth of the wood for your bowl.

Re: What a wrestling match!

#10

right on Lyle.

john lucas

>

Re: What a wrestling match!

#11

Okee dokeee

Marc Phillips

>I will try that next time! ... since I have a bunch of cedar logs hanging around I will give it a shot..

Thanks :)