Siamese twins Challenge
Tery Scott
>This is the finished piece see next picture for set up
Red Mallee twin burl 1100mm long sanded with organ oil to bring out the depth of color then lacquered
Sits on 2 feet at each bowl It also has dyed with that leathery look burls get that I love ,As it dried the middle bent up pulling the outsides down adding a bit of mystery to how it was turned
These pieces may look dangerous but I am in full control and take extra care with the safety and set up
A clear path is always important if something does come off it will always head side ways and I am behind the lathe. I am not turning these pieces fast only about 800 to 1000 revs.My rule of thumb is if you don't think something is right ask yourself why.Stop the lathe and think
As I turn away the wood it is necessary to adjust the counter balance as you go.
At present I am working on a piece that is being turned on 36 centers
I will post some pictures when finished I am quite excited about this piece and are looking forward to its completion
Comments welcome
Can anyone tell me how to put in multiple pictures into the same thread



