Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Club tools

Posts

Club tools

#1

Club tools

Skip Beardsley------WebKitFormBoundarylsHY4+4w161B

>Our club has two mini lathes with tools and grinders. We have some money in the treasury and are considering the purchase of other tools. Wondering what tools other clubs have as club property?

Secondly, should we be considering underwriting educational opportunities or having more demonstrations rather than adding to our tools.

As always, the advice and guidance of this group is sought and appreciated.

Skip

Re: Club tools

#2

Re: Club tools

Ed Davidson

>How about sponsoring youth memberships in the local club and AAW...

Re: Club tools

#3

Katherine Kowalski

Re: Club tools

Katherine Kowalski

>I suppose the question your group needs to ask is -- "why" do you need tools? Does your group go out and demonstrate in public often, or are the tools used only by your guest demonstrators? What activities do you use them for?

Our club, The Rocky Mountain Woodturners, needs lots of tools because we host an annual symposium where we have a hands-on workshop that is part of the program. (Most of the participants are beginners, or folks who don't think about bringing tools to the symposium). Thus there's a definite need for us.

However, the tools are in storage but for two days out of the year... If our members demonstrate for the public at a fair (or similar), that turner brings his/her own tools. Our guest demonstrators always bring their own tools.

Soooo... I would suggest that a far better usage of funds (in my opinion), would be to attract high-level demonstrators, or use the money to enhance your club library. (The fantastic DVDs out on the market now are well worth the small expenditure, and everyone can benefit from them). Similarly, having a top-level demonstrator can be life-changing for members of your club.

Katherine

President Elect, Rocky Mountain Woodturners

Re: Club tools

#4

Re: Club tools

jim miles - Charlote NC

>If your use is mostly for guest demonstrators.... Most demonstrators bring their own basic tools. What we find out they tend not to have are things like adapters for the thread of our lathe and things that are bulky or hard to bring - air compressor, grinder such.

Re: Club tools

#5

Re: Club tools

Mark Wollschlager

>Skip,

I am in the Capital Area Woodturners.

We have around 230 members and 10 lathes.

We have sets of tools for each of our lathes:

Diamond parting tool, 1" spindle roughing gouge, 3/8" spindle, 1/2" bowl gouge, 1" round nose scrapers, talon chuck, live and drive centers.

As far as specialty tools, we have a couple of others, vacuum chuck, Oneway bowl coring.

We have a couple of members who deal in turning tools so we have gotten a decent deal on them.

We have skill enhancement sessions twice a month and do public demos on occasion.

The shop is in a school and Adult education classes taught by our members also use the equipment.

We also have 4 or 5 workshops a year with visiting demonstrators.

The tools and lathes get used.

Demonstrators are a great way to bring in new members ( if advertised well enough ) which can help to enable your club to expand your tool and educational offerings.

Underwriting education is a tougher issue.

Most workshop/class offerings are fairly expensive.

How much can the club afford to offer?

Depending on the interest levels, your selection committee may have a difficult time narrowing the field to match what you are offering money wise.

Secondary to that is what the club receives in return for the grant.

Newsletter articles, a demonstration by the grant winner, etc.

Will it be an adequate return on investment.

If your club cannot offer the grants on a regular ( yearly or so ) basis it may not sit as well.

Just a couple of thoughts.

Mark.

Re: Club tools

#6

Re: Club tools

russ fairfield

>Skip, a couple suggestions.

You can make your money go farther if you buy Benjamin's Best tools from Penn State. They are a decent quality and the price is right.

Apply for an AAW educational grant to purchase the tools and accessories for the lathes. There is still time for this grant cycle. The fact that you meet and have the workshops in a school woodshop gives you a definite advantage on getting grant money, especially if you have some sort of mentoring program with the school.

Re: Club tools

#7

Re: Club tools

Jeff Brockett

>Skip, the Tennessee Association of Woodturners has a good quality compressor and a shop vac included in their tool inventory. Another idea is to offer scholarships up to a certain dollar amount.