Re: PM 3520 ?
Gil Jones...GA
>Could be several things that cause that sound.
With the lathe power cord unplugged!!
Check that your drive belt is running true in relation to the pulleys, and that both pulleys are truly inline with each other.
Also, while you are playing "inside the headstock�, tighten the setscrews on the upper and lower pulleys.
On mine, sometimes, the belt tension (tight or loose) can cause a sound to be emitted from the drive area. More or less tension on the belt can fix that one, but I would bet on the pulley setscrews being loose, or at least not tight enough.