Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Imperial Presence

Posts

Imperial Presence

#1

Imperial Presence

Tery Scott

>After posting Kava Time I thought you may like to see what came next

This piece (sorry for the quality of photo) was turned in one piece in the rectangle

Measuring 4ft 6inch long

The body of the bowl and the wings are all 1/4 thick

This piece took weeks to complete I lost count after 100 hours

The wings were textured then bronze and copper leaf applied to both the under side and top . Then though a process that I wont be able to replicate because I cannot remember the steps I took to apply the verdigris and boot nugget.

The Celtic knot was carved into the piece coper leafed a,textured and verdigris with lemon juice

The inside had gold ,bronze,copper and silver leaf applied and then a sponged effect to resemble burl .( 7 packets of 30 sheets were used in total

The legs were turned on seven centers and copper wire bound to the tips and half way along the stem

I gave the work about 25 to 30 caots of mat lacquer to give depth but without glossing the work out

A bit of a mix of ideas but the collector that has this piece along with 16 others of my work thinks it is the bees knees.

I have to admit at being proud of the end result.When it was sold one of teh conditions by the nbuer was that I wasn't to make another ,that was easy as I would be mad enough again anyway

He has been offered ten times what I sold it for but refuses to sell it which I am pleased at because I like my work to go to a home that is appreciated .I wont sell a piece if I think it is going to end up in a cupboard along with many other gifts.

Allot of heart goes into my work and each piece is sold with part of me inside


img

Re: Imperial Presence

#2

Bill Blasic

Re: Imperial Presence

Bill Blasic

>Terry,

Awesome! WOW! What more can one say.

Bill

Re: Imperial Presence

#3

Ellis Walentine

Four and a half feet long???!

Ellis Walentine

>Terry, you need to get a gnomon in your pictures. I thought this was a tabletop piece! Yikes, what an effort!

Drop dead wonderful.

Cheers, and thanks for posting.

Ellis

Re: Imperial Presence

#4

Steven Antonucci

That's what I call a Shop Cleaner!

steve antonucci

>Just run the lathe at 1000 RPM with the door open, and all of the dust will be blown away! Make sure to hold onto the lathe or you'll get sucked out too!

Astonishing if it was a foot. Ridiculous at 4 feet plus.

You are the man.

steve

Re: Imperial Presence

#5

Re: Imperial Presence

Don Orr

>This is so far over the top even for you !

Incredible !

Re: Imperial Presence

#6

Re: Imperial Presence

Mike Rubes, Apex, NC

>Wow! Add me to the list of those saying "Wow"! That is incredible. It really needs something in the picture to drive home the scale. 4.6 feet long. Aye carumba.

It must have been like turning a propellor. A MOVING propellor!

Thanks for the pic,

Mike

Looking for Tom in Apex, NC!

Re: Imperial Presence

#7

Re: Imperial Presence

GaryG in MD

>Terry, Let me try to absorb this -- a coffee table turned on seven centers. OMG. For once in my life I am speechless. This is so far "above and beyond" that I can't do it justice. You should have gotten the 10x -- you are obviously pricing your work too low. Congrats on everything from concept to finishing. Wow, indeed. ...Gary

Re: Imperial Presence

#8

Keith Tompkins

Re: Imperial Presence

Keith Tompkins

>I'm beginning to worry about you, Terry! Awesome.

Re: Imperial Presence

#9

Caramba!

Jorge Castaneda~Downeast Maine

>Terry,

Looking at your work always leaves me speechless, I mean it as a compliment.

Thanks for sharing

Jorge

Re: Imperial Presence

#10

Re: That's what I call a Shop Cleaner!

Tery Scott

>Steve I had to turn this at 1200 there was so much air hit and miss

To turn the front I had to strut the underside with 2x1 back to the main body of the bowl as the centrifugal force was lifting the wings up words

It sure a chop chop sound like a helicopter ,because of its size the lathe was cycling going faster on the down stroke

Re: Imperial Presence

#11

Re: Imperial Presence

Tery Scott

>the legs were turned on 7 centers ,not the bowl The curve on the end was fun ,like offsetting a banana and turning it and I only made 7 so I got 4 the same L.O.l