Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Mold for Whoopi

Posts

Mold for Whoopi

#1

Mold for Whoopi

Mike Foster

>I finally got a decent piece of cherry large enough to turn a mold for the glassblower that is reproducing a lamp shade for Whoopi Goldberg. She broke one of a pair and was emotional enough about these lamps that have traveled with her through her career that she wanted it replaced. I don't think cost was really an object. The glassblower found me through the VT crafts council and wondered if I could make him a mold. I said sure, thinking it would be fun and a challenge to do something a little different.

It was a lot harder than I thought. Reproducing an exterior on the interior of a hollow-form is no easy task. It took a lot of measuring and re-measuring using sticks cut to the diameter needed at various levels in the form. Just measuring the diameter of the glass accurately was a task, as calipers needed to be level and could easily slip down on one side, or move slightly away from a true diameter. The rim and the base both had to be very accurate to accept the metal decorative rim and fit in the metal base of the lamp. I undersized both of these diameters by 1/8" to ensure the final glass will fit and allow a little loss of wood from scorching by the hot glass. At the end I did something that I rarely do, I cut the thing in half on the bandsaw. They have to be able to remove the glass. I put the glass up to my mold and found I did pretty well, but the curves did not match perfectly, but they were close. It is almost impossible to visualize the curve of the interior of a hollow form, I had to rely on the measurements and my tactile senses. I didn't mention that this was a log that was 16" in diameter and 14" long when mounted on the lathe. So the mass and depth of hollowing just added to the thrill.

The glassblower was thrilled with the results and picked it up tonight. He plans on blowing the glass on Wed. I would love to see this, but my day job unfortunately won't allow me that pleasure. I posted a couple of pics of the project. I hope to get some pictures of the final result soon and will share those when they come.


img

Re: Mold for Whoopi

#2

Re: Mold for Whoopi 

Mike Foster

>


img

Re: Mold for Whoopi

#3

Re: Mold for Whoopi 

Mike Foster

>


img

Re: Mold for Whoopi

#4

Re: Mold for Whoopi 

Mike Foster

>


img

Re: Mold for Whoopi

#5

Very interesting!

DavidWalser

>That looks like it was a fun and rewarding project.

Two questions:

1) Did you consider using poplar or some less dear wood than cherry? Maybe cherry has some characteristic that makes it ideal for glass molds, but I hate to see such fine wood used and then thrown away.

2) Is it alright with your once-removed famous client for you to have mentioned her name? Just wondering.

Re: Mold for Whoopi

#6

You know the old joke.....

Barry Irby

>How to make a wooden Indian? Steal a block of mahogany 3' x 3' x 7' tall and cut away everything that doesn't look like an Indian.

In this case it just the opposite. Mount a really nice block of cherry and cut away everything inside it that looks like the glass globe.

That's really nice work. Congratulations. Would really like to watch the glass blower. Post some pictures if you can.

The glass blower should make two while he is at it. Not only would they match, but she would have a spare.

Re: Mold for Whoopi

#7

Re: You know the old joke.....

Tony - Memphis

>Ha, that's exactly what I was thinking about making two to match the new mold. What a neat project. And for a neat person. Love me some Whoopi. Funny how challenges such as these are relative....I'm just thrilled when I turn something like a knob or handle and I don't screw it up!

Tony

Re: Mold for Whoopi

#8

Re: Mold for Whoopi

Don Orr

>Nice work Mike-but that's no surprise ;-))

Re: Mold for Whoopi

#9

Re: Very interesting!

Mike Foster

>I hear you about the cherry. In fact I mentioned to the glass blower that it was hard to turn that nice log of cherry into such a large pile of shavings. For whatever reason, glassblowers prefer to use fruitwoods for their molds. I'm not sure why, and the glassblower I am working with couldn't really come up with a reason. I think it has been handed down with the craft, and the reason why fruitwoods are preferred may have been lost. I'm sure that someone in the past found they worked better than other woods for some reason (perhaps they are slicker to the hot glass, or don't char as readily). I couldn't argue because the glassblower that is doing the work found the cherry and brought it to me.

I didn't really give a thought to mentioning Whoopi's name, as the glassblower didn't really have any reservations. I see your point, but think that she wouldn't really mind.

Re: Mold for Whoopi

#10

You hit the nail on the head *LINK*

Mike Foster

>Barry and Tony both were reading the mind of the glassblower. He is planning on making 2 shades which will match each other from my mold (since the curve will be a little different and the glass won't be exactly the same shade and texture) and giving her the one I copied as a back-up.

The glassblower's name is Robert DuGrenier, and he is known worldwide. He does work on par with Chihuly (I was in Columbus, OH last month and saw a great Chihuly exhibit at the botanical gardens). I didn't realize this till after I had committed to making the mold for him. The mold took a FULL day of turning. After checking out his website I landed on what my fee for the work would be for him. I asked if he would be willing to trade one of his pieces for it and he readily agreed to this. He has a particular piece in mind. I score that as a coup on my part. I'll post pictures of the final lampshade and the piece he sends after I receive them. Check out his website if you're interested.

Mike


http://www.dugrenier.com

Re: Mold for Whoopi

#11

Steven Antonucci

Most turners try to avoid funnels :-)

steve antonucci

>

Re: Mold for Whoopi

#12

Re: Most turners try to avoid funnels , AH HA!

Barry Irby

>That's what I made. It's not a funnel, its a mold for a glass blower. I recently posted about making a funnel with my mangled McNaughton system A 16" diameter walnut blank, right through the bottom. Then I cut it in half to cut out a defect. Then the epoxy failed. NOW! if I just knew a glass blower and Whoopi.

Mine is not nearly as well done as this one.

Re: Mold for Whoopi

#13

Great Score !

Don Orr

>That is great that he was willing to barter. I love well made glass work. You did good on all aspects Mike. Looking forward to seeing pics of the end results.