Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Walnut score

Posts

Walnut score

#1

Walnut score

john lucas

>Non turners don't know how to measure a tree. A friend called and said he was taking down an 18" Walnut tree. When I got there it was about 12 to 14". I took it anyway. I spent the afternoon cutting some of it up. I plan to take the blanks to our local club tomorrow night and the rest to Club in Dalton,Ga where I'm demonstrating on Tuesday.

After cutting all this up into blanks I couldn't stand it so I turned on. I haven't done a square sided bowl in a while so I thought I would do that. It came out pretty nice. I put a layer of finish on and put it in a paper sack to dry for a day or so. It might not need that but it has a small knot in one side and I left the wings a little thicker than the body because the bark was kind of fragile.


img

Re: Walnut score

#2

Re: Walnut score

john lucas

>I forgot to mention that I have about 3 times that amount of wood still in the yard. If you live near me and need some walnut give me a call. There's no way I have time to use it. I'll end up cutting some of it up into spindle turning squares.

Re: Walnut score

#3

Re: Walnut score

Bill Grumbine (Kutztown PA)

>John, way back in 1993 when I was just starting to turn, my wife's aunt called to tell me they were taking two 24" walnut trees down. I had been in their home and yard many times, and did not remember the trees, so I questioned her closely about them. She became irritated, and told me if I wanted the wood, I had better come and get it. In the interest of family harmony and getting some decent wood, I made the two hour drive each way.

When I arrived at her house, I found a pile of firewood sized rounds, the largest of which was 11" in diameter. I could not even find the second tree. I finally found a sapling that measured a whopping 2" in diameter! When I pointed the discrepancy out to the aunt, she just shrugged her shoulders, and said, "Well, they looked like they were 24". You are right, non turners can't measure trees. Nice haul though.

Re: Walnut score

#4

Re: Walnut score

john lucas

>Bill This is all straight grain with almost no knots. It will be some sweet turning.

I found that drivers also can't judge how steep a hill is for a bicyclist. You ask them if it's very hilly up the road and they will say, no it's not bad. You'll find later that there is a 1/2 mile hill of considerable elevation.

Re: Walnut score

#5

Trees....

Barbara Gill, Remlik VA

>LOL Most can't even measure logs. In the 29 years I have been operating a sawmill I could probably count on my fingers and toes how many customers had a clue about measuring the diameter. Even after I explained.

Re: Walnut score

#6

Dick Hines

Re: Trees....

Dick Hines

>John, after cutting all those blanks I bet you are/will be in the market for a new band saw blade.

I got a chance to get some maple last weekend. The land owner told me that I could have all I wanted. She also wnated to know if I wanter her to unlock the gate. No, I said the logs don't look to large I will just throw them over the fence. When I got a good look at the logs I had to go back to the owner and ask if she minded opening the gate. Some times we turners get the sizes mixed up.

I did get 5 "big" pieces that it was all I could to get into the truck.

Re: Walnut score

#7

Re: Walnut score

Jeff Willaford

>Nice haul, John.

Re: Walnut score

#8

Bandsaw blade

john lucas

>Dick I buy my bandsaw blades from a local supplier at $6 apiece. I usually just toss them. I decided to pratice my bandsaw sharpening yesterday so I spent about $15 minutes putting an edge on it. I cut through all of these and is still cutting but not as well as it did in the beginning.

Re: Walnut score

#9

Re: Walnut score

John Jordan

>My friend Dan Bailey, who salvages a lot of wood, says trees are like ****s, the size is always exaggerated. LOL

John

Re: Walnut score

#10

I don't exaggerate :)

John Lucas

>

Re: Walnut score

#11

Re: Walnut score

Jeff Brockett

>John, if you have some to spare I would like to come over and get a chunk or two. The last pieces I got from you turned out great!