Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

TURNING MAGNIFYING GLASS

Posts

TURNING MAGNIFYING GLASS

#1

TURNING MAGNIFYING GLASS

Carl Barton

>The LOML has listed on her Christmas wish list a magnifying glass. I found one set of plans but they call for using brass parts, I would like to turn one completly out of wood. I was hoping someone may have done this before and might be able to point me in the right direction for a set of plans.

My thought was to turn the piece that holds the lens by turning two pieces and put a groove in it and then put the lens between the two pieces, then glue the two halves together. The handle should be no problem.

If someone has some plans or point me in the right direction for a set I would be greatful.

Carl

Re: TURNING MAGNIFYING GLASS

#2

Re: TURNING MAGNIFYING GLASS

Bill Turpin in WNC mountains

>Get with John Lucas as to how to cemet the glass to the wood. Normal flex of wood will break the glass.

Re: TURNING MAGNIFYING GLASS

#3

Re: TURNING MAGNIFYING GLASS

john lucas

>I would turn a retaining ring that can be glued in later. As Bill said you need to turn a groove in the wood larger than the glass to allow for wood expansion. Design it so that the retaining ring looks like the other side of the piece.

The handle of course is easy. drilling for the handle can be challenging. I use a V block that fits on my drill press. It is just 2 pieces of wood glued to a large L shaped piece. I glue these 2 pieces onto the L at 45 degrees to form a V. The you just clamp the magnifying glass to the V and center it on the drill press.

Re: TURNING MAGNIFYING GLASS

#4

Re: TURNING MAGNIFYING GLASS

Texian

>Guess you could do a segmented ring. Glue up to half rings, sand ends to a perfect match, clamp halves together and turn a groove in the I.D. Unclamp, separate, insert glass and glue. Have done "floating" bottoms in segmented vessels this way. Works a treat, as they say in Oz.

Re: TURNING MAGNIFYING GLASS

#5

Thank You

Carl Barton

>Thank you all for your ideas. I was thinking about turning a segmented ring myself.

Carl

Re: TURNING MAGNIFYING GLASS

#6

Re: Thank You

John Lucas

>Carl I believe there was an article on turning magnifying glass in Woodturning magazine. I have all the issues but I don't know if I can find it. I'll try to remember to look.

Re: TURNING MAGNIFYING GLASS

#7

Re: Thank You

Carl Barton

>John,

I will look in my magazines as well, but I only have about two years worth.

Carl