Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

McKnaughton Coring Question

Posts

McKnaughton Coring Question

#1

McKnaughton Coring Question

Bruce Lane

>I didn't want to hijack Barry,s thread...

I am intrigued by Mike Hunter's modification to the action end of the coring blade. Can anyone post a picture or a description of the modification and perhaps an approximate price of having this done? Perhaps it may be better for me to contact Mike directly for pricing?

Thanks,

Bruce

Re: McKnaughton Coring Question

#2

Re: Mcnaughton Coring Question

Barry Irby

>Here are two of the three Mike just did for me. I have only used the one that is not in the picture, but it worked better than the cutters did when new. I will let Mike tell you what he charges, I don't want to speak for him. Great to work with him though. Did exactly what he said and the turn around was as good as could be. The cutters are double ended and Mike sent me the little tool/wrench. I am having him send me a spare cutter and a couple of the screws. I Figure I will drop one or two even if they never break.


img

Re: McKnaughton Coring Question

#3

Re: McKnaughton Coring Question

robo hippy

>Those look a bit pointy to me. I had Mike do one for me, and I had him do a square cutter. Primary concern for me is having the cutter make be 3/8 inch wide, otherwise, you have to make 2 passes down the bowl as you core, not just one. It does cut nicely. As to better, I am not really decided yet.

robo hippy