Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

[AD] Don Pencil Deep Buffing Adaptor *LINK*

Posts

[AD] Don Pencil Deep Buffing Adaptor *LINK*

#1

Ellis Walentine

[AD] Don Pencil Deep Buffing Adaptor *LINK*

Ellis Walentine

>

Wood N Things Buffing Systems
by Don Pencil Woodturning


This adaptor is 12 inches long! Now you can GO DEEP with the new �BIG 12� wood lathe buffing adaptor from Don Pencil Woodturning. Get down inside vessels where you never could before.

The Don Pencil Wood N Things 8-inch buffing adaptors have been the deepest buffing adaptors in the industry by over an inch. Well it just got better. We now offer a 12-inch-long buffing adaptor that works the same as our 4� and 8� buffing extensions but gets you a lot deeper when finishing. When you combine the depth of this adaptor and a Wood N Things 3� or 4� bowl buff, you can easily buff your finish to a depth of 15 or 16 inches.

Imagine the possibilities. When you combine this versatile new extender with the Wood N Things Tripoli, White Diamond, Carnauba Wax and our new PL compounds, the wood turner is certainly getting the best of it all.

Available only at WWW.DONPENCIL.COM

The BIG 12 is currently available for 1.25� x 8tpi lathe spindles only. Three others threads will be available in December 2009.

WOODCENTRAL SPECIAL OFFER
Get another 15% off at checkout by redeeming coupon code WC91115BIG12

Don Pencil Woodturning
Bringing Wood Finishing to a Higher Level and Deeper Place




Don Pencil Woodturning

Re: [AD] Don Pencil Deep Buffing Adaptor *LINK*

#2

Re: [AD] Don Pencil Deep Buffing Adaptor

john lucas

>I purchased one of those when they first came out. This is an outstanding piece of gear. I highly recommend it. I used the Beal extension which is half that length. It was too easy to hit the handles of my mirrors on the headstock. The same was true with hollow vessels. You always had to maintain a certain angle when buffing or you could hit the headstock of the lathe.

Deep bowls were out of the question. This thing gives you much more freedom of movement when buffing and of course it will also reach into a deep bowl.

I have nothing to gain by this and don't even know Don. I just know this is one of the best pieces of equipment I've bought over the years and would like to pass that tip on to others.

Re: [AD] Don Pencil Deep Buffing Adaptor *LINK*

#3

Just wondering . . .

Charles Yawn

>Would there be a way to attach some kind of apparatus to this to do deep sanding?

Charles

Re: [AD] Don Pencil Deep Buffing Adaptor *LINK*

#4

Dick Hines

Re: [AD] Don Pencil Deep Buffing Adaptor

Dick Hines

>I have had one of these for years. I don't remember where I got it but it doesn't have Don's name on it.

Re: [AD] Don Pencil Deep Buffing Adaptor *LINK*

#5

Don Pencil

John, Charles, Dick

Don Pencil

>Thank you all for your kind comments.

Charles, on the surface the idea sounds good. I would not try it myself as sanding is a far more agressive media than buffs and buffing compounds. The chance of one's work being freed from their grip and deposited on the side of their head or the other side of the room are pretty good.

Dick, Jim Driskel of Southren California developed the original Wood N Things Buffing System with 4" adaptors many years ago. I had some 8" adaptors made for Jim about eight years ago. They caught on well and have coninued since as well as the 4". About three years ago I took over the Wood N Things Buffing System from Jim and have since added the "PL" compounds and wheels as well as the new "BIG 12" adaptor to the line-up.

All of the blue wood lathe buffing adators are from Jim or myself. Sometimes there has not been a name engraved on them even though they were sold at retail outlets. Some only have Wood N Things on them and some have Don Pencil Woodturning or both. Although in some cases it is implied in retail advertizing that these are made by another, they are not. These adaptors are manufactured and supplied to them by Don Pencil Woodturning.

I hope this history has been helpful.

Be Well,

Don Pencil

Re: [AD] Don Pencil Deep Buffing Adaptor *LINK*

#6

Dick Hines

Re: John, Charles, Dick

Dick Hines

>Thanks, Don

Re: [AD] Don Pencil Deep Buffing Adaptor *LINK*

#7

Re: [AD] Don Pencil Deep Buffing Adaptor

Grant Wilkinson

>Don:

I found the ad a bit confusing as it shows the extension on what appears to be a Jet Mini lathe, but it says that it is only available in 1.28 x 8 spindle size. The Jet mini is a 1 x 8 spindle size.

Re: [AD] Don Pencil Deep Buffing Adaptor *LINK*

#8

Re: [AD] Don Pencil Deep Buffing Adaptor

Grant Wilkinson

>My previous post should read 1.25 not 1.28.

Re: [AD] Don Pencil Deep Buffing Adaptor *LINK*

#9

Don Pencil

Re: [AD] Don Pencil Deep Buffing Adaptor

Don Pencil

>Good eye!!!

Ad had the best pic available for a buffing adaptor.

1 x 8 will be available next month.

Sorry for the confusion.

Be Well,

Don