Good parting tool?
nick
>My home made parting tool binds up a lot, particularly in green wood. Can anyone recommend a good alternative? Some people seem to like the kind with a fluted edge but how do you sharpen 'em?
Thanks
Knowledge You Can Build On — Est. 1998
Good parting tool?
nick
>My home made parting tool binds up a lot, particularly in green wood. Can anyone recommend a good alternative? Some people seem to like the kind with a fluted edge but how do you sharpen 'em?
Thanks
Re: Good parting tool?
Barry Turner
>Usually the parting tools with the fluted edges are very narrow (1/16") in width. They would not be my choice for green wood. A good 1/8" diamond cross-section parting tool would be my choice. When parting to a depth of more than an inch or two, it helps to widen the cut. This will keep the tool from binding and catching in green wood.
Re: Good parting tool?
Texian
>Good advice from Barry. My home made 1/16" parting tool cuts beautifully, but when going deep I widen the cut on the waste side with a wider (also home made) tool. I switch back and forth between tools as needed to keep the cut with the thin tool relatively shallow. Could do the same with the wider tool but I just like using the thinner one.