Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Finishing in Equatorial climates

Posts

Finishing in Equatorial climates

#1

Finishing in Equatorial climates

Hought Wahl

>Ernie Newman (Australia) and I are going to Samoa in February to set up a production turning capability at a school there to help in the recovery from the recent earthquake/tsunami.

One of the issues we are facing is the finish that will work best in that environment. Equatorial, sea level, local wood.

I would like to hear from turners with experience in that environment to give us a jump start - and enable us to have the right finish available there! We expect these products to be sold at the local tourist markets, and are looking for opportunities for them to sell overseas - looking for contacts! Most items will be small spindle stuff initially.

Large portions of these islands were devastated by this tsunami in September - our goal is to help them help themselves.

Ernie and I are paying all of our own expenses, but are seeking donations for the equipment and supplies needed to set up this project - we are about half way there. If you want to keep abreast of our progress and experience on Samoa - including our finishing experience - I will be posting on the Turning Aid for Samoa page on Facebook, reachable as a friend of houghtwahl@yahoo.com