Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

inexpensive bowls

Posts

inexpensive bowls

#1

inexpensive bowls

john lucas

>The message below on the Bowl mill and things like this photo of a guy selling his bowls below what it would cost me to buy gas to get the wood is why I don't turn many bowls. I simply don't want to compete. I don't want to start an argument over pricing. We each sell our work for what we want. As someone who now has to make extra money with my turnings to offset the loss of my overtime it's frustrating when you see prices like these.

One of my good friends is retired and he is like many turners, he rapidly built up more stock than he could give away so he started selling it. At first his prices were ridiculously low. I don't know why he changed but he's now selling in more upscale places and his prices more closely reflect the time and expense that actually goes into his work.

He used to sell his hollow vessels for $45 and his bowls for $20 at what we call Santa's workshop. This is kind of a lower end craft show so things won't sell for hundreds of dollars. The next show is this weekend so it will be interesting to see his prices. I'm pretty sure they have at least doubled.


img

Re: inexpensive bowls

#2

Eduardo Sarmiento

Re: inexpensive bowls

Eduardo Sarmiento

>Hi you are soooo rigth but really the buyers dont know the diference in the fairs and markets,I have ladies comming to my place and think that 20 bucks is very expensive lol,I enter the web and show them the prices in the del mano galleries and they get a hearth attack,then in the web of lesser know turners,they can believe a bowl for 150 dollars but they will go and buy one of my pieces in a gallery and pay 5 times more, can you believe it?

Re: inexpensive bowls

#3

Re: inexpensive bowls

David Schell

>What is the source of the photo below? You sure this is not someone's roughouts just stored in those boxes? None of them look like they have been finished. Or maybe these are just the rejects.

Also, I checked out the Holland Bowl Mill website - their 6" bowls are pretty cheap but they get $190 for a 17 inch bowl. That's a pretty decent price for a couple of hours max work.

Re: inexpensive bowls

#4

Steven Antonucci

My craft show ruminations...

steve antonucci

>I'd love to get a fair price for my bowls, but truth be told, there aren't that many folks walking around even the best craft shows who will be willing to spend big $$$ on a well made bowl.

There are more folks willing to spend "some" money on a well made bowl. For these folks, I offer something of a compromise. I make a bowl with a fair price on it for the amount of effort that I put into it. I usually make one good (enough) clean finishing cut, and perhaps lightly sand it with some used 220 grit if it's within reach. Finish is nothing more than mineral oil.

If folks aren't willing to spend a lot of money on something, why would I make those things with the intent of selling them? Wouldn't I be better off making something that was more appropriate to what my customers want to spend? How much effort do you feel is required in a $20 bowl? For me it's simple- $20 worth of effort.

Steve

P.S. the guy in the picture is a nut job! unless those bowls are all tearout messes, I would buy them all and finish them like they were "roughouts"- and sell them for 10X profits.

Re: inexpensive bowls

#5

Re: inexpensive bowls - Question

Barbara Gill, Remlik VA

>John, what was the appearance of these bowls? Were they just turned out of green wood and thrown in a stack? I can't imagine turning that many of any one thing hour after hour and day after day!