>I stumbled onto this bowl mill video on You Tube. I thought the cutters were interesting. Actually, the whole thing was interesting. Lots of specialized machines. What I thought was particularly interesting was the comment about steaming each blank for four hours. Sort of a Hmmm? moment. Wonder how that would work for us mere mortals?
That is a segment from an episode of "How It's Made" from the Discovery Channel and the Science Channel that aired this past spring. The mill is the Holland Bowl Mill, Holland, Michigan. www.hollandbowlmill.com I know a few bowl makers who use their "bee's oil" as their finish.
I think those of us who turn bowls could learn a thing or two from them. I noticed they make all their bowls as a section of a sphere. They flatten the rim on a disk sander, They flatten the bottom. They and with same sort of belt sander. Apparently the steaming allows them to retain the shape well enough that they don't have to "return" the bowls. Also, that cutter they used to clean up the bowl's exterior appeared to co and excellent job.
Out of all that, I thought the steaming might be the easiest part for us to replicate. We have had endless discussion about Liquid Dish Detergent, Alcohol soaking, drying in paper bags, etc. Could it be that steaming would work better? They claimed they steamed them and let them dry for a month and then finished them. Seems like something worth a try.
Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f
Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f
Guest
Re: Something to be learned form these people....
Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f
>Steaming works the same as boiling in water, Barry. Stephen Russell, who invented this protocol, started by steaming his bowls -- he stumbled on the idea while helping a friend steam bend some wood. He realized the steaming "relaxed" all the stress out of the wood. Building a steam cabinet big enough to steam bunches of bowls is quite an undertaking. He hoped to get others to try his "invention". So he decided to see if boiling in water would work. He got the same results.
>Holland Bowl Mill. About 2 miles from my house ! Been there several times, showing off my work. They agreed it is really nice, and we both agreed that we each have our own markets.
All of their bowls dry typically oblong. Their sanding process takes this into account and doesn't try to correct it.
>I live about 20 miles from Holland Bowl. Never been there but hear a lot about their bowls. Did an Art show recently where I was selling my bowls, and had a few lookers say: "I buy all my bowls from Holland Bowl." I generally reply something like, "That's fine, they produce good bowls. However, I offer an alternative for people who may want something original or different". One good thing is that Holland Bowl does not sell their bowls at rock bottom prices. They get a decent price for them, IMO.
>Steaming and boiling are not really the same. The steaming is done at high pressure and high temperatures. Something that can't be achieved in a pot on the stove. Boiling might have some effect on very thin pieces but it would require hours of boiling to get equal penetration and temperature through a 1/2" wall.
Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f
Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f
Guest
Re: Something to be learned form these people....
Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f
>His protocol calls for boiling the bowls for one hour for each wall of thickness. As soon as they are done and the water has dried off them (about 10 minutes) put them in a brown paper bag. They will dry quicker than non-boiled bowls. I prefer to wax them all over. My breakage rate is about one tenth of one per cent -- and think many of those were cracked before they were boiled. Sometimes there are hairline cracks we cannot see. I boil bout 500 bowls a year.