Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Yew Beaut lid off

Posts

Yew Beaut lid off

#1

Yew Beaut lid off

Tery Scott

>Yew Beaut

I was going to call this Some thing special after my last post of Nothing special

But I think Yew Beaut is more appropriate

After seeing all of Eugene�s Yew root pieces I have had a secret wish that one day I might find a bit of yew. When visiting a woody mate I spotted a narly old piece of root under his hedge. I enquired what it was. When he replied it was a Yew root and he didn�t know what to do with it. I volunteered to take it off his hands in exchange for a piece of Kauri.

He thought I was crazy as this was destined for his fire heap.

This is the second piece I managed to make from the lump of dirt in cased yew.

This stuff was definitely out of my comfort zone as it was bone dry and as hard as a rock. I have never tried Pewter work inlays, another comfort zone adventure.

I finally managed to buy some casting pewter 2kg of the stuff in a big block.

I thought I had been didled as when I tried to heat it wouldn�t melt; it took me a while to realize the block was acting as a heat sink and not getting hot enough.

A few cuts into thin slices on the band saw and I was finally away.

The voids were undercut with the dremel before I melted in the pewter with the aid of dams being made with aluminium tape. Then with a soldering iron (had to go and buy one of those also the old electric type with a large head as my gas heated one burnt the wood before the pewter melted.)

I had all sorts of fun trying to get the pewter in the voids it was like playing with liquid mercury, went everyway but the way I wanted it to.

Next I cut the pewter back to the wood and started to turn out the inside.

I wanted a � inch wall thickness but didn�t quite get to that as some of the pewter started falling out into the inside. Back to the drawing board, I managed to get inside with some surgical tweezers and put on some tape so I could recast the pewter.

I super glued in all the suckers as well this time .The inside is sanded to the same grit as the out side with my new toy a free wheeling sander from Woodcut.

A Coca bola finial was fitted; I have been saving this my only piece for a special occasion.

8 inches high A first for me as I finished with oil then waxed and buffed

Definitely out of my comfort zone

What do you think


img