Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Yew Beut latest turning

Posts

Yew Beut latest turning

#1

Yew Beut latest turning

Tery Scott

>Yew Beaut

I was going to call this Some thing special after my last post of Nothing special

But I think Yew Beaut is more appropriate

After seeing all of Eugene�s Yew root pieces I have had a secret wish that one day I might find a bit of yew. When visiting a woody mate I spotted a narly old piece of root under his hedge. I enquired what it was. When he replied it was a Yew root and he didn�t know what to do with it. I volunteered to take it off his hands in exchange for a piece of Kauri.

He thought I was crazy as this was destined for his fire heap.

This is the second piece I managed to make from the lump of dirt in cased yew.

This stuff was definitely out of my comfort zone as it was bone dry and as hard as a rock. I have never tried Pewter work inlays, another comfort zone adventure.

I finally managed to buy some casting pewter 2kg of the stuff in a big block.

I thought I had been didled as when I tried to heat it wouldn�t melt; it took me a while to realize the block was acting as a heat sink and not getting hot enough.

A few cuts into thin slices on the band saw and I was finally away.

The voids were undercut with the dremel before I melted in the pewter with the aid of dams being made with aluminium tape. Then with a soldering iron (had to go and buy one of those also the old electric type with a large head as my gas heated one burnt the wood before the pewter melted.)

I had all sorts of fun trying to get the pewter in the voids it was like playing with liquid mercury, went everyway but the way I wanted it to.

Next I cut the pewter back to the wood and started to turn out the inside.

I wanted a � inch wall thickness but didn�t quite get to that as some of the pewter started falling out into the inside. Back to the drawing board, I managed to get inside with some surgical tweezers and put on some tape so I could recast the pewter.

I super glued in all the suckers as well this time .The inside is sanded to the same grit as the out side with my new toy a free wheeling sander from Woodcut.

A Coca bola finial was fitted; I have been saving this my only piece for a special occasion.

8 inches high A first for me as I finished with oil then waxed and buffed

Definitely out of my comfort zone

What do you think


img

Re: Yew Beut latest turning

#2

Steve Kubien

Re: Yew Beut latest turning

Steve Kubien

>I don't care how comfortable you are, this is gorgeous! Well done Terry.

Re: Yew Beut latest turning

#3

Re: Yew Beut latest turning

Carole Valentine

>Definitely a beauty, Terry! You said you superglued the pewter in...I am confused about how in the world you did that? Did you pop out the pewter after it had cooled, apply glue and re-insert?

Keep on playing...I think this one is the beginning of a series!

Re: Yew Beut latest turning

#4

Re: Yew Beut latest turning

Mike Brazeau

>This is a beauty Terry. Thanks for tip on the Aluminum tape for backing up a hole. Have been wanting to try some pewter inlay for years. Clipping this one away for future ideas.

Mike

Re: Yew Beut latest turning

#5

Re: Yew Beut latest turning

keith zimmerman, Normal IL

>Finally, an inlay that appears balanced on the piece. Too often, I see people using inlay in only one or two areas of a piece. That just doesn't show any balance and, in fact, makes the balance of the piece appear off. This is the exact reason I quit using inlay to fill voids.

This one doesn't do that.

And it looks good too.

keithz

Re: Yew Beut latest turning

#6

Sounds like a PIA but worth it

Mike Foster

>I love the bands of pewter on top, how did you cast them solid? The twist on the finial is exquisite. Very nice piece.

mike

Re: Yew Beut latest turning

#7

Awesome!

Jorge Castaneda~Downeast Maine

>Terry,

A beaut all right,

Thanks for sharing

Jorge