Speaking of wood.... (Cross posted on Main)
JL
>Went to Greensboro on 11/06/09 to pick up a load.
Mixed hardwoods. The thick stuff will end up as legs and turning blanks.
Knowledge You Can Build On — Est. 1998
Speaking of wood.... (Cross posted on Main)
JL
>Went to Greensboro on 11/06/09 to pick up a load.
Mixed hardwoods. The thick stuff will end up as legs and turning blanks.
Nice haul!
Scott Burr in Ben Lomond CA
>
Re: Speaking of wood.... (Cross posted on Main)
Lan Brady
>Congrats, Looks like you went to the Century Auction.
I wanted to bid on several lots, but did not own the flat bed Truck they required.
Lan
Don't let that stop you..
JL
>I rented mine from Penske for $80 and $0.10 mile. Round trip cost was ~$140 and I had to refill it (OUCH!).
What was your $/BF with the truck expense?
steve antonucci
>I know that the lots were selling for pennies per BF, but what did you figure as the end costs per BF (species independent). I'm betting that you were under $1.50 a BF?
S
Re: What was your $/BF with the truck expense?
JL
>To start with, IRS charges 10% of the bid. So if you buy a lot for $100, you have to pay $110. In addition, they charged a loading charge of $25/lot. You also had to pay $1.00 per auction to bid - but there were typically 40 lots per auction.
The transportation costs were $334.35.
That being said, the total cost per board foot was $1.42 as an average price.
$1.42/BF is a steal- enjoy it :-)
steve antonucci
>