Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

JCCFS tools are ready!

Posts

JCCFS tools are ready!

#1

JCCFS tools are ready!

Ed Moore in SW VA

>I sometimes wonder if folks realize how much preparation goes into teaching a week-long course at a school like John C Campbell. I have prepared tools for the class that may be borrowed or purchased by students. There is a LOT of work involved in this endeavor.

In the picture you will see a 1/4" round skew and a cap to protect one from the very sharp point. Then there is a handle with a collet and tee Allen wrench. There are three hollowing tools for making globe-style ornaments, a skew which may be used in the handle, and a 1/4" Doug Thompson detail gouge.

And I am really looking forward to a meal at Rib Country before the class begins!

Respect the bandsaw,

ED


img

Re: JCCFS tools are ready!

#2

Re: JCCFS tools are ready!

John Lucas

>Ed I made 10 sets for the last ornament class I taught. I can make the steel parts in a matter of minutes but it takes a while to make 20 handles.

Re: JCCFS tools are ready!

#3

Re: JCCFS tools are ready!

Emmett Manley, Lakeland, TN------WebKitFormBoundar

>Ed, your students appreciate your hard work and dedication. See you Sunday at the Folk School.

Re: JCCFS tools are ready!

#4

Re: JCCFS tools are ready!

Ed Moore in SW VA

>John,

I made about twenty collet handles and fifteen skews for JCCFS and others. Just grinding all the skews and tool bits takes time.

Respect the bandsaw,

Ed

Re: JCCFS tools are ready!

#5

Re: JCCFS tools are ready!

Don Orr

>That is one fine set of tools Ed. Sure wish I was joining you for the class. Maybe some day. And you're right about prep for classes or demos. Participants usually have no idea how much work it is.

Have a great week !

Re: JCCFS tools are ready!

#6

Mike Stafford

Re: JCCFS tools are ready!

Mike Stafford

>Ed, your students always get their money's worth with you. I know how hard you work to prepare for the class.

The tools are great but you don't show pictures of all the wood you have prepared and have ready for everyone to turn. It takes a lot of time to gather the wood and prepare it also.

Enjoy the week.

(And don't get barbecue sauce on your shirt!)

Re: JCCFS tools are ready!

#7

JL

You'll probably get apple bread instead of pie..

JL

>unless you REALLY want pie. I went and picked up the apples at Mercers today.

Re: JCCFS tools are ready!

#8

JL, if you make it, then it will probably ....

Ed Moore in SW VA

>be good. So bring whatever you like and we will certainly appreciate it. At this point it is seven plus me.

Respect the bandsaw,

Ed

Re: JCCFS tools are ready!

#9

JL, my wife makes an absolutely ...

Ed Moore in SW VA

>delicious apple - blackberry pie. Think about it ....

;^D

Ed

Re: JCCFS tools are ready!

#10

Dick Hines

Re: JL, my wife makes an absolutely ...

Dick Hines

>Sounds like to me that you are only going for the food. Food is good though. Have fun. See you no Nov 19.

Re: JCCFS tools are ready!

#11

Yep, .... Burp!

Ed Moore in SW VA

>

Re: JCCFS tools are ready!

#12

Respect the bandsaw!

MikeNelson

>Ed, I noticed your warning at the close of your comments and couldn't agree more! While rounding a mesquite blank on my bandsaw I went through some punky wood and in a fraction of a second sliced my index finger 3/4 of an inch from the tip dead center and parallel to the finger nail, looked like a long mouthed crockadile! I put butterfly strips all around and went to the em the next day..I didn't know you had to get there within 6hrs or they wouldn't stich it up. Doc said leave the strips and gave me antibiotics and pain pills, the feeling is comming back slowly and I have much more respect for that saw.

Re: JCCFS tools are ready!

#13

Mike, if my little sign-off can ...

Ed Moore in SW VA

>make a few people stop and think and thereby avoid a cut, then it is well worth it.

I hope that your finger heals quickly and gives you no problems.

I cut my knuckle on a bandsaw just before Labor Day and even though it is healed, it is stiff at times and feels tight. Carole Valentine read about it on WC and says that she thinks of that mishap whenever she turns the bandsaw on. Good!

As we say, respect the bandsaw,

Ed

Re: JCCFS tools are ready!

#14

Re: Mike, if my little sign-off can ...

Jeff Willaford

>Ed. I think your experience helped to burn grooves into the memories of several of us. I always try to learn from the experience of others.

Re: JCCFS tools are ready!

#15

Keith Tompkins

Re: Respect the bandsaw!

Keith Tompkins

>Mike, sorry to hear of your accident. However, you must not only respect the bandsaw, you must change the way you operate the saw. Frankly, your hand should have NOT been in the path of the saw blade...every time you cut a bowl blank, you are both ripping and cross-cutting. Ripping is cutting straight into end grain, so some effort is required...at the point where a rip cut changes to a cross-cut, the blade begins to cut freely with little effort...similar to your punky wood. This situation occurs twice per blank, and you must be prepared. At that point, your hand should be BEHIND the blade, NOT in front of it. With your hand behind the blade, a slip, or the blade exiting the wood, will cause no injury. This is a method you should employ on EVERY piece of wood you cut. It's easy to second-guess an accident, but your accident did not have to happen.

Re: JCCFS tools are ready!

#16

Re: JCCFS tools are ready!

bowlman

>WOW!!!! Even though I don't make Christmas ornaments, just seeing these wonderful tools makes me wish I had the money to attend your class at JCCFS. Anyone would be proud to own such wonderful handmade tools. Nest wishes and thanks for all the fish!

Re: JCCFS tools are ready!

#17

I know what you mean!

Jennifer@Indy.USA

>Ed I know what you mean. Several weeks ago I had to make 18 sets (36 tools) of mini hollowing tools for a weekend small scale turning class at Marc Adams. I kept putting it off and putting it off and then all of a sudden it was upon me! I was in a panic. I'm glad I had help making them. Yours look fantastic. I'm proud to say I'm the happy owner of one of your little skew chisels. It's sweet!

Enjoy your class!

Jen