Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Non yellow substitute for Tightbond III

Posts

Non yellow substitute for Tightbond III

#1

Non yellow substitute for Tightbond III

Dave Belser

>I'm looking for a waterproof substitute for Tightbond III that isn't yellow or is less yellow. I need a thick glue (CA won't work because it soaks in to much) that is waterproof and clear / less yellow.

Any suggestions appreciated.

- Dave

Re: Non yellow substitute for Tightbond III

#2

Re: Non yellow substitute for Tightbond III

Bill Sams

>The tightbond "3" glue is brown in color not yellow, is that what you want?

Re: Non yellow substitute for Tightbond III

#3

Re: Non yellow substitute for Tightbond III

Dave Belser

>Bill - My mistake for shooting off a request before the wife brought the glue home. I've been using Tightbond II and it is too yellow for what I'm doing (and besides, it's water resistant not proof)

I'll give the 3 a try. But I'm still likely looking for another watter-proof and clearer glue.

- Thanks.

Re: Non yellow substitute for Tightbond III

#4

Re: Non yellow substitute for Tightbond III

John Lucas

>Go with epoxy. It is clear and waterproof.

Re: Non yellow substitute for Tightbond III

#5

E600 or HXTAL

Ruth Niles

>My glass customers that glue clear glass to my stainless steel bottle stoppers use either E600 epoxy (at Michael's or A.C. Moore) or HXTAL which you'd have to go online for a place to purchase. The E600 is not perfectly clear but the HXTAL dries totally clear.

Hope this helps.

Re: Non yellow substitute for Tightbond III

#6

Dick Hines

Re: E600 or HXTAL

Dick Hines

>Go www.silcom.com. I would hope this stuff is really good because it is pricey.