Acrylic Blanks
Woodie49
>Does anyone know where one can get large (2 1/2" x 2 1/2") Acrylic Blanks?
Thanks
Knowledge You Can Build On — Est. 1998
Acrylic Blanks
Woodie49
>Does anyone know where one can get large (2 1/2" x 2 1/2") Acrylic Blanks?
Thanks
Re: Acrylic Blanks
Carole Valentine
>Biggest I have seen is 2" diam rods from United States Plastics.
Re: Acrylic Blanks
Woodie49
>I looking for the type used in Pen Turning.
Re: Acrylic Blanks *LINK*
russ fairfield
>Bill Baumbeck at Arizona Silhouettes has several pages of them
Bottle Stopper blocks
Re: Acrylic Blanks
Woodie49
>Bigger
Re: Acrylic Blanks *LINK*
russ fairfield
>Go to the IAP site and look around. There is a forum section on casting. Someone may already be making large blocks, or maybe someone can make them for you. If all else fails, you can cast them yourself. It isn't difficult, and there are many pencrafters who are already doing it. Many of them are advertising their blanks on the IAP site.
International Association of Penturners
Re: Acrylic Blanks
Grant Wilkinson
>How long do you need them?
Re: Acrylic Blanks
Guy Bratt
>Can't help sorry. I too would like to find acrylics in larger sizes.
3"x3"x12", 4"x4"s 6"x6"s
Go to the source
Al Goldstein
>Look up Cadillac Plastic or another plastics dealer in your area. The major acrylic manufacturers make thick plastic sheets. I have some Plexiglas that is 2 inches thick. They may manufacture even thicker plastic sheets.
Good luck.