Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

Cowbell ornaments, help me choose ...

Posts

Cowbell ornaments, help me choose ...

#1

Cowbell ornaments, help me choose ...

Ed Moore in SW VA

>the best design. There are two proto-types in the picture - without clappers. Please give your candid comments as I try to design the Swiss cowbell ornament for my class at John C Campbell Folk School next week. I made the one on the right first and then decided to try two brass strips on the second. They are slightly proud of the natural wood. I value your suggestions: two brass strips, lose the brass, shape #1 or shape #2, forget the idea, anything you like.

I have ordered 189 small bells (6 mm) to use on the clappers. You may laugh out loud at me for this one. I could only find them at one source and there was a minimum order. (Maybe I'll slip some of the extra ones in the pockets of ushers at church.)

Okay, I'm ready for the over-ripe vegetables! Please share your suggestions.

Respect the bandsaw,

Ed


img

Re: Cowbell ornaments, help me choose ...

#2

Mike Stafford

Re: Cowbell ornaments, help me choose ...

Mike Stafford

>I like the one with two brass strips, Ed.

The bead does nothing for me although I have seen bells with beads.

I think overall the shape of the one with the two brass strips is more eye appealing.

Folks are gonna have a good time with you next week Professor Moore.

How were the ribs?

Re: Cowbell ornaments, help me choose ...

#3

Re: Cowbell ornaments, help me choose ...

GalenV in Iowa

>189 clappers!

Sounds like the Johnny Carson and John (Jake) Webb clapper caper skit if you ever watch that one.

I wondered what made a Swiss cow bell different so found this in a search.

I see where your band and bead of the right bell come from.

Looks like more overall taper on the ones I found and the flatter top of the left.

I'm sure our Hobby Lobby would have had fewer bells but hope the ones you get have more jingle!

Galen


img

Re: Cowbell ornaments, help me choose ...

#4

Re: Cowbell ornaments, help me choose ...

Dennis Yoder

>Two brass strips, Ed. Your students are going to be in for a great learning experience as did we. Dennis Y

Re: Cowbell ornaments, help me choose ...

#5

Re: Cowbell ornaments, help me choose ...

Bill Crommett

>My vote is for the two brass strips. If you are going to have beads, do two of them or just leave off the single brass strip.

Re: Cowbell ornaments, help me choose ...

#6

Re: Looks like more fun Mr. Ed! I ....

Jamie Donaldson

>... also prefer the L bell w/o the bead, and strips of different colors would be an alternative "design opportunity." Let me know if the new video system is working at the Folk School turning studio.

Re: Cowbell ornaments, help me choose ...

#7

I like the one on the right the best.

jake Niedling

>

Re: Cowbell ornaments, help me choose ...

#8

The Webb-Carson Clapper caper it is!

Ed Moore in SW VA

>Galen, I got a real kick out of your post. I have the Clapper caper clip saved somewhere.

I also have a Swiss cowbell similar to the ones you showed - somewhere. I have seen it in the past several months, but now that I need it to show the class, I can't find it.

Thanks,

Ed

Re: Cowbell ornaments, help me choose ...

#9

Re: Cowbell ornaments, help me choose ...

Carole Valentine

>189 small bells? What an odd number! At least yours won't "click" like mine! LOL

I like the brass inlay. I can't remember what shape a real cow bell is so I'm not much help there, but I actually like the shape of the one on the right a little better.

Re: Cowbell ornaments, help me choose ...

#11

Carole, look at ...

Ed Moore in SW VA

>GalenV in Iowa's post with the picture. These are the Glocken style Swiss Cowbells, as opposed to the Treicheln style.

The little bells came in packs of 9 and it took 21 packs to reach the threshold for an order.

Do you still think of me when you turn on the bandsaw?

Respect the bandsaw,

Ed

Re: Cowbell ornaments, help me choose ...

#12

Re: Cowbell ornaments, help me choose ...

Ed Moore in SW VA

>I think I like the shape/outline of the one on the right the best and I prefer the two strips of brass.

Hint: I sprayed the whole side of the bell and then removed a thin layer with a bedan or a parting tool so that I was left with the brass strips, which are about 1/64" proud of the the rest of the bell. Near the flange I just took a couple finishing cuts with the gouge.

Thanks for your help!

Respect the bandsaw,

Ed

Re: Cowbell ornaments, help me choose ...

#13

Re: Carole, look at ...

Carole Valentine

>Ed, believe it or not, I think of you almost every time I use it now. I was cutting a blank today and for whatever reason, it stopped feeding as easily. My tendency was to to push it on through but I didn't (that little whisper in my ear "Respect the bandsaw")...I backed the blade out, checked for problems and then came at it from another direction which cut fine.

Re: Cowbell ornaments, help me choose ...

#14

Carole, if my wife finds out ...

Ed Moore in SW VA

>that I have been whispering in your ear - I AM DEAD MEAT!

;^D

Of course, I bought the tee shirt from Ruth "I am one tool away from divorce", so I live near the edge anyway.

whisper ... "respect the bandsaw" ...

Ed

Re: Cowbell ornaments, help me choose ...

#15

Re: Carole, if my wife finds out ...

Carole Valentine

>LOL! Just keep whispering whenever I start to do something stupid! I am already divorced so I can't get that shirt from Ruth...maybe she should make one that says "One tool away from divorce...and I bought it anyway!"

Re: Cowbell ornaments, help me choose ...

#16

Re: Carole, if my wife finds out ...

Carol Reed - home in Strawberry

>If she does that shirt, I want one too!

Re: Cowbell ornaments, help me choose ...

#17

Ric Taylor

Jack Webb

Ric Taylor

>

Re: Cowbell ornaments, help me choose ...

#18

Dick Hines

Re: Cowbell ornaments, help me choose ...

Dick Hines

>I like the one with the two strips, Ed.

After seeing the bells you are band from my demo at Blue Ridge.

Re: Cowbell ornaments, help me choose ...

#19

Jack Webb RIGHT! Mind and fingers not connected!

GalenV in Iowa

>

Re: Cowbell ornaments, help me choose ...

#20

Why? Are you going to ...

Ed Moore in SW VA

>be doing bells at your demo?

Ed

Re: Cowbell ornaments, help me choose ...

#21

Dick Hines

Re: Why? Are you going to ...

Dick Hines

>No bells. Just smowmen and bird houses.

I just did not want you to snoreing during the demo.

Re: Cowbell ornaments, help me choose ...

#22

If the room is warm and I had a good ...

Ed Moore in SW VA

>supper, then the odds are against me. Mark St Leger takes keen delight in disturbing my sleep. I don't know why people wake me up, because if I'm asleep then I'm not plotting and scheming.

Respect the bandsaw,

Ed

Re: Cowbell ornaments, help me choose ...

#23

the right one...with the bead

keith zimmerman, Normal IL

>

Re: Cowbell ornaments, help me choose ...

#24

Re: Cowbell ornaments, help me choose ...

Matt Overton

>To my eye, the brass strips are a little wide for the proportions of the bell. The right one's shape is more pleasing (the ones in Galen's post even more so). Beautiful work!

Re: Cowbell ornaments, help me choose ...

#25

Matt, I agree

Ed Moore

>I had decided to use narrower bands and go for the shape of the second bell without the bead.

Of course, the students may choose their own shapes for the bells.

Thanks,

Ed