Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Ornament proportions....

Posts

Ornament proportions....

#1

Mike Stafford

Ornament proportions....

Mike Stafford

>Thanks to Ed Moore's help I am turning some ornaments that my wife requested as gifts for her friends.

However, I have a question about proportions.

How does one determine the proper length and diameter for the overall best appearance aesthetically for an ornament?

I am turning a mixture of hollow globe type and urchin type ornaments and I have a heck of a time deciding how long the icicles need to be to look right. After the ornament is assembled I can usually tell when the icicle is too short or too fat but I have difficulty making that assessment while turning.

Any help/suggestions would be appreciated.

Re: Ornament proportions....

#2

Re: Ornament proportions....

Dennis Yoder

>Mike, I have heard both the 1/3 - 2/3 and 2/5 and 3/5's. I usually just eyeball it and usually my icicle's are usually a little longer than others. Dennis Y

Re: Ornament proportions....

#3

Re: Ornament proportions....

Bill Turpin in WNC mountains

>Make a set of sample finials, then turn the correct length in the appropiate wood.

Re: Ornament proportions....

#4

Re: Ornament proportions....

john lucas

>Mike I have the same problem. I've tried using number proportions. It doesn't work for me. I have to make 2 or 3 and then I start to get the feel for what looks right with that ball design. There is another problem for me. Sometimes I make repeating elements. Do I make 2 or 3 or more. Some look good with 2 and some look better with 3. It depends a lot on the length of the finial, the size of the repeated patterns, and then how many.

Apparently my customers aren't as picky as I am because they all sell.

Re: Ornament proportions....

#5

Bob Moffett

Re: Ornament proportions....

Bob Moffett

>Mike,

I turn the globes abotu 2" - 2 1/4" in diameter with he finails being about 1/2"-3/4". I turn the icicles about 5" long and taper them the length of the icicle. Each feature in the icicle will be smaller than the one above it encept for an onion shape on the bottom. I usually only put two or three features on the icicle prior to starting the taper.