Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Quality Forstner style bits

Posts

Quality Forstner style bits

#1

Quality Forstner style bits

Ed Moore in SW VA

>Last week at Nick Cook's peppermill demo he used an excellent Forstner style bit to drill out the center area. He told us the name but I did not hear him distinctly. This saw-tooth edged bit was a named Colb, Kolb, or Colt - I think. If you have a clue, then please tell me the name and where they can be purchased.

TIA

Respect the bandsaw.

Ed

Re: Quality Forstner style bits

#2

Re: Quality Forstner style bits

Harvey Meyer in Atlanta

>Ed -

Those are Colt Maxicut bits from Germany. Packards sells them and I think you can also get them at infinitytools.com. They are expensive, but well worth the cost. The bits are designed for the rota-stop system and they also have extensions and a morse taper bit holder all using the rota stop system to lock the bit in without using set screws. You can also find a video on youtube.

Harvey

Re: Quality Forstner style bits

#3

Re: Quality Forstner style bits

Joe Herrmann

>Ed:

The Maxi-cut bits are wonderful drills. I bought a set last year to make some peppermills for Christmas gifts and was really impressed with the quality and the way they performed. I will buy more of them in the future. Like Harvey said, they are more expensive but well worth the money. I especially liked their chucking system

They also make drill bits for penturners that are also excellent. They drill a straight hole with or no little blow out in the bottom.

Joe

Re: Quality Forstner style bits

#4

Re: Quality Forstner style bits

Nick Tuzzolino

>Also see Craft Supply. Well worth the cost. Buy just the ones you need and it won't break you.

Re: Quality Forstner style bits

#5

Thank you all!

Ed Moore in SW VA

>You are right and I have ordered them from Packard. I like a good drill when drilling out the body of a birdhouse ornament. It's important that it stay on center when drilling since you are left with a 1/16" thick wall.

Of course, with Packard's quick service they may arrive yesterday. ;^D

Thanks again, respect the bandsaw,

Ed