>...hollowing with my new Monster hollowing system, 6 1/2"H x 4"W, and walls 1/8" just for practice. The laser makes it too easy, and added some violet flair pigment under the lacquer just as a test.
>I know you directed this at Jamie but I feel the urge to jump in here.
I typically hollow with a Lyle Jamieson rig with the laser. On some small stuff I hollow by hand with the tools you sent my in last years Secret Santa. I get no more enjoyment doing it by hand vs the rig. Hollowing is grunt work unless the opening is very large or there are a ton of voids and you can see the inside. Th enjoyment for me is in shaping the outside (#1) and feeling how light the piece is when done (#2).
>... any differently, but did enjoy the freedom from extra measuring of wall thickness often needed with "freehand" hollowing without the aid of the laser. I know the perils of overconfidence that the laser can instill, but the extra speed of production will allow more time for other experimentation, such as dyeing, in some of my future work.
>The Monster, Mini-Monster and their cousins bring hollow forms through small openings capability to anyone who has the money to buy one of these systems - flattening the learning curve quite a bit, and no special grind needed either.
Some who feel that you have to EARN the right to do hollow forms through the School of Hard Knocks, and have their diploma, often resent the fact that even a newbie - with some disposable income of course - can skip the School of Hard Knocks almost completely.
I'm with the earlier poster - it's the OUTSIDE shape/form that you have to develop an eye for - the inside is mainly grunt work.