Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

The Monster meets Studly!

Posts

The Monster meets Studly!

#1

The Monster meets Studly! 

JamieD

>


img

Re: The Monster meets Studly!

#2

Re: The Monster meets Studly!

JamieD

>I recently received the Monster hollowing system I ordered from Randy, and today was the first time I had to make a trial run. What a great shiny new toy!! It is the perfect hollowing companion for a Stubby, and the articulated design is so much easier to set-up and use compared to a captured system. I have mixed in my old tools with the system accessories, and will now do more hollowing in the future.

Re: The Monster meets Studly!

#3

Re: The Monster meets Studly!

charlie belden

>While The Monster doesn't make hollowing idiot proof (I can attest to THAT) - it sure brings hollowing, and even hollowing through relatively small openings, within the abilities of a relative newbie (I can attest to THAT also).

The HSS quater inch cutters are SO quick and easy to sharpen - and thus more apt to be sharpened at the first hint of dullness.

Great complete system - no accessories to also have to buy in order to really use it - good price, well thought out and manufactured - and a good guy behind it who is so easy to do business with.

Enjoy both monsters - and I look foreward to what you come up with using The Monster.

Re: The Monster meets Studly!

#4

Mike Stafford

Re: The Monster meets Studly!

Mike Stafford

>Looking good Jamie!

I noticed your tool rest...Is that something you had made? I have not seen one exactly like that one before.

Re: The Monster meets Studly!

#5

Bob Moffett

Re: The Monster meets Studly!

Bob Moffett

>Mike, you need one of those for your boxes!

Re: The Monster meets Studly!

#6

Re: Mike- that is an old rest with........

JamieD

>...drill rod on the top, similar to the nice Robust Comfort rests available now. I believe they were marketed under the Wood River brand, before that was a supplier to Woodcraft. They were criticized for creating a finger pinch point in the L angle, and later models had a wedge of acrylic to fill the gap. I have used it mostly for hollowing because of the hard smooth top surface.

Re: The Monster meets Studly!

#7

Re: The Monster meets Studly!

Bill Neddow------WebKitFormBoundary+w+uCg3oRve3I+f

>I make about one hollow form every two years, so I do not NEED the Monster. But I could not help looking at it when I was in Ohio at Turning 2009 recently. It just exudes quality and drew me in from across the room. Boy, is that ever a well made bit of equipment! I may have to take up deep hollow turning just to justify purchasing a Monster.

Re: The Monster meets Studly!

#8

Mike Stafford

Re: Mike- that is an old rest with........

Mike Stafford

>Ah ha, I have one of those with the plastic piece filling in the corner.

That is why it piqued my curiosity as it looked familiar but at the time I could not place where I had seen it...in my own shop in a shorter version....with the plastic.

Re: The Monster meets Studly!

#9

Re: It is quality built Bill, and I am ..........

JamieD

>...tight enough with my money to be selective about justifying new toys. The fit and finish are excellent, and it is a very complete system, ready to go right out of the box. I of course have to tinker with everything, and mixing in parts of my other tools adds much versatility. I'm very pleased with the purchase.

Re: The Monster meets Studly!

#10

Re: The Monster meets Studly!

keith zimmerman, Normal IL

>I really like my Monster. I had Randy make me some adapters so I could use my Kelton hollowers in place of his boring bar. I haven't yet had a chance do more than test them, but I know from that testing that they are going to make this well made tool even better and easier for me.

keithz

I am just a very satisfied customer.

Re: The Monster meets Studly!

#11

Re: The Monster meets Studly! - Keith

Stuart Johnson

>if you get a chance please post a picture of the adapters.