Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Inertia Sanders ( Non powered)

Posts

Inertia Sanders ( Non powered)

#1

Inertia Sanders ( Non powered)

jake Niedling

>Does anyone really use and like these sanders? I have one and tried it several times but always end up grabbing the power sander for my bowls. I think I will get rid of it at our next club meeting tool night.

Re: Inertia Sanders ( Non powered)

#2

Dennis in Southern Oregon

Re: Inertia Sanders ( Non powered)

Dennis In Southern Oregon

>Jake, I have a homemade 4-inch one that I use part of the time. The main problem is that it doesn't work very well in many places such as the inside of bowls. (Possibly a 2-inch one would be more flexible.) The nice thing about it is that it seems to leave a more uniform scratch pattern than powered sanders. I almost never find any deep scratches that require a lot of attention before going on the a finer grit. I can't offer any explanation, just an observation. I will hang on to mine. Dennis

Re: Inertia Sanders ( Non powered)

#3

Re: Inertia Sanders ( Non powered)

GaryG in MD

>Jake, I like them very much for the outsides of things, and I agree with Dennis' comments. I end up with a much better scratch pattern. OTOH, also like Dennis, I would not consider using them on the inside of a bowl -- they don't work well near the center because the linear speed of the wood is too slow, and they are too dangerous near the lip. For the inside, I use the powered sander. The downside of using a power sander is that if you get heavy handed and don't keep rotating the piece or the disc evenly and constantly, you can easily oversand it and make an asymmetrical dip. The other concern is that the sapwood is often softer than the hardwood and sands out much faster -- also leaving a less than desirable situation. (Of course you also have this problem if you sand by hand.) It's much better to learn to do a good job with the cutting tools and sand minimally and at higher grits. Easy to say... ...Gary

Re: Inertia Sanders ( Non powered)

#4

Steve Kubien

Re: Inertia Sanders ( Non powered)

Steve Kubien

>I used to love my home-made one but then I (finally) learned to have a lighter touch with my power sanding and I am much happier with the results, and speed. Ditto what the others have said about inside vs outside of a bowl.

Re: Inertia Sanders ( Non powered)

#5

Re: Inertia Sanders ( Non powered)

john lucas

>Jake I tried one twice. I either can't get the hang of them or they don't work. They are useless for my hand mirrors. I can only sand the outer 2/3rds. They do work on the outside of bowls but I'm so much faster with a power sander.

I did purchase one of the Grex sanders and it sort of works in non powered mode. I don't have my big compressor hooked up and it works my small one too hard. Maybe I'll get the money stashed away to buy another 120 feet of 220 wire and I'll be able to hook up the big one. What's funny is I will be spending more money on the wire than I did on the compressor. Then you add on the price of the concrete pad and small shed addition to house it and the dust collector and you've got twice what I paid for the compressor. Oh well,one of these days.

Re: Inertia Sanders ( Non powered)

#6

Re: Inertia Sanders ( Non powered)

Charles Watson------WebKitFormBoundary+ATeQdvhmFc4

>I use a HF die grinder for this purpose and really like it for the outside of bowls. It was cheap, no bearings to be concerned about, and no electric motor to blow dust out of.

Re: Inertia Sanders ( Non powered)

#7

Re: Inertia Sanders ( Non powered)

robo hippy

>I have never tried the inertial sanders. Just didn't look practicle, and you can't stop the bowl to work on problem areas which are usually from tear out. The thing I discovered about the power sanders are they work better with light to medium pressure (never cause the motor to bog down), and keep both the bowl speed and the drill speed down. Much more effective than the higher speeds, and less heat generated.

robo hippy

Re: Inertia Sanders ( Non powered)

#8

I will stick with power sanding..

jake Niedling

>With the power sanding I really don't have any limitations. Like you all have said light pressure with the power sander, good sand paper and I get a great sanded finish. It is faster and you can stop the lathe and work on difficult spots or wings of a natural edge bowl. So the inertia sander will be going to the club tool sell. Appreciate everyones comments.