>For Christmas I usually try to do one big woodturning for someone in my family. This year's receipient has asked for a platter. I have a vice big dry mahogany blank but have never made a platter before (lots of bowls, a couple of plates, but never a platter. If you were going to get a platter for Christmas what features would you like to see? Are there any websites and/or articles to which you would refer? During finishing would you prefer satin or glossy? Are there any questions I am forgetting to ask?
>Jim I like to do 2 things. First I make the rim a little wider than normal on big platters. This is because they may use it on the table to hold fruit or other decorations and would like some of what I did show. If it's for display instead of functional ignore this.
I try to use a satin or semi satin finish that is easily cleaned. I tend to use gloss lacquer and knock it down with steel wool.I also don't put details or carving that will hold dust. It must be easy to clean. Again if it's not functional do what you like.
Mike Mahoney's DVD "From the tree to the table" has an excellent section on utility platters, aka "plates".
When I think of platters, I think of Frank Penta. (www.frankpenta.com) There's alot of information on his site. I know some WCers have taken his class. He even got Mike Stafford to turn something without fitting a lid to it. :-)) But then again I wouldn't put it past Mike to make lidded "cake" platters or something. LOL!!
>John and Greg both gave good advice. I haven't worried about the level of detail I have done on my platters as I have finished them in an oil/varnish mixture thinned and applied many coats. The details can easily be wiped clean with a damp cloth.
Frank Penta's class was about detailing platters and making both sides attractive. I very much enjoyed the class and learned a great deal and in particular learned a number of techniques for finishing the bottom of platters.
My wife's favorite platter is a very broad shallow bowl 17 1/2" in diameter and nearly 2" deep overall. It has a rolled undercut rim and was turned from some beautiful ambrosia maple. As John said a broad rim makes it easier to handle and allows the wood to be seen even when in use. The foot on this platter is a set of 7 concentric beads.
The biggest problem with platters is what to do with them when not in use so think about including a stand for display along with the gift.