Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

Packaging and shipping turnings

Posts

Packaging and shipping turnings

#1

Packaging and shipping turnings

Dan Oliphant

>For those who sell turnings and ship them to various locations, I would like to ask a few questions.

Due the the fragile nature of turnings, what precautions should be considered in packaging?

Do turnings that have a lacquer finish require a wrapping of something prior to wrapping in bubble pac?

What is the best practice to use when an item is damaged in shipping?

I suspect there are many other questions that should be asked, so feel free to expand on any area that I didn't address.

Re: Packaging and shipping turnings

#2

Katherine Kowalski

Re: Packaging and shipping turnings

Katherine Kowalski

>I ship my turnings all over the world. The best practice is to keep the piece immobilized in the box -- any movement can break the piece or damage the finish. Make sure to use an appropriate box -- neither too big and especially not too small.

Damage in shipping is a grey area. What I usually do is insure the piece, which means that if the shipping company damages it, they have to pay for the repairs. If there is no external damage to the box, it means that I, the shipper, have improperly packed it, and I will repair/replace the piece when the damaged goods have been returned.

Re: Packaging and shipping turnings

#3

Peter Charles Fagg (UK)

Re: Packaging and shipping turnings

Peter Charles Fagg (UK)

>I have been fortunate in sending pieces to Scandinavia, South Africa and one piece to Australia.

I would suggest that you wrap the items in bubble wrap several times so that the item is fully cushioned away from the sides of the box i.e. minimum 1". Triwall cardboard boxes are ideal.

Reinforce the corners of the box with plastic sheaths that can be made from off-cuts of hard plastic.

Other than that I cannot offer any more advice.

Ensure that insurance is sufficient.

Regards, Peter.

Re: Packaging and shipping turnings

#4

Re: Packaging and shipping turnings

Barry Elder

>There was an article in the AAW Journal probably last year by a well-known artist who ships high dollar pieces. It was very informative.

Re: Packaging and shipping turnings

#5

Re: Packaging and shipping turnings

Dan Oliphant

>Do I need to consider issues with heat/cold or other environmental issues?

Re: Packaging and shipping turnings

#6

Re: Packaging and shipping turnings

john lucas

>I ship some of the artwork that I photograph. I do all of the above but don't put bubble wrap next to lacquer. A good friend of mine learned that the hard way. Put a layer of white wrapping tissue over it first.

If it's very fragile I double box it. I have also made custom supports out of foam, cardboard, etc, for pieces that are suspended and really fragile.

Can't answer your questions on insurance because I hear so many conflicting stories. I have heard that some places won't insure "art". If you call it craft work they will insure it. My personal experience is, they haven't asked, so I just put the price my client tells me to insure it for. Fortuneately we haven't had a claim so I don't know if they would pay the actual "art" price.

Re: Packaging and shipping turnings

#7

Re: Packaging and shipping turnings

Donna Banfield

>I've shipped plenty of turnings, and some of them overseas. They were medium sized (10" or smaller) and I double-boxed them. I wrapped the turning in white tissue paper first, then bubble wrap. I put packing peanuts on the bottom of the box, placed the turning on top of the layer of peanuts, then poured more p-nuts in around the turning, creating a cushion. I sealed this box, then placed that box inside another larger box, which was then cushioned with more p-nuts.

Overkill? Maybe, but it took a lot less time and $$ to do this then to have to repair or replace a damaged item. Most of my stuff is one-of-a-kind pieces, and if I had to make another one, it would be a major headache for me to duplicate it exactly.

I recall that the AAW journal a few years ago (2-3) had an article about mailing/shipping turnings. They posed this question to 3 or 4 well-known turners and the above method I described is how one of them shipped their work. This same article also gave 'reviews' on the quality of the various shipping carriers, and their 'service' if you ever had a piece damaged (i.e., had to make a claim). If I recall correctly, FedEx came out on top on almost every category. When I ship turnings, I tell the customer that is the method of shipment I use, and they've never had a problem paying for the extra cost when I explain that I've never had a piece damaged by them.

Re: Packaging and shipping turnings

#8

what John says, AND...

Mike Jones

>I would definitely wrap each piece in wrapping tissue and would not allow bubble wrap to come into contact with lacquer finished OR shellac finished turnings. It was an embarrasing lesson for me to learn.

Re: Packaging and shipping turnings

#9

Re: Packaging and shipping turnings

Bruce McElhaney, Spring Lake, Michigan

>IMO, turnings are best wrapped in some kind of paper before bubble wrapped then surrounded by peanuts within a larger size box. I tend to over wrap turnings these days because of damaged goods in the past. UPS is the worst for damaging shipments in my experience. Plus, UPS is not only rough with fragile packages, but they have denied my two separate claims for damages even though the items were well packed and insured. I no longer use UPS for shipping. USPS and Fed EX. are much preferred. This may sound like a rant against UPS, but it's customer beware!

Re: Packaging and shipping turnings

#10

Katherine Kowalski

Re: Packaging and shipping turnings

Katherine Kowalski

>I suppose it really depends on what you are mailing, (on whether heat/cold might affect the piece). However, the only contingency I might worry about is rain. With clients who live out in the country (as I do), and the postman "conveniently" leaves their packages on the doorstep... and it rains...

The way I pack my items, they are always suspended in the box, so I don't have to worry about enclosing them in a plastic bag.

I once had some wood shipped to me, which the postman left at our secondary door. We didn't see the package until two days later... after 2 solid days of deluging rain. To my delight, I discovered that cardboard is remarkably good at deflecting water -- the wood/paper inside the box wasn't even wet!

Re: Packaging and shipping turnings

#11

Re: Packaging and shipping turnings

Wally Dickerman

>I always wrap in tissue paper, then bubble wrap. I think that crushed newspaper as a cushion is as good as anything. I recommend using US Mail as the shipper. Fewer problems and better insurance. If the piece is really fragile, double boxing is a good idea.

Wally

Re: Packaging and shipping turnings

#12

Re: Packaging and shipping turnings

Dan Oliphant

>Thank you for the responses,they have been helpfull in my decisions. I have decided to start selling my turnings online through an outlet that seems more suited to the type of product I produce. Time will tell though.

I will use UPS ground for most, if not all shipments. All items will be insured. The packaging info will be utilized to the fullest.

Thanks again.

Re: Packaging and shipping turnings

#13

Re: Packaging and shipping turnings

Pete in Holland, MI

>One has to remember that when your package leave your hands, it joins thousands of others that are handled, trucked, flown, conveyored, packed, repacked, sorted and then end up on a customer's door step.

Putting "fragile" on a box isn't understood when they are machine sorted & transported.

Just assume that it will be handled roughly and pack accordingly. If, when you finish packing it, you are afraid to drop it on the ground, you're asking for trouble for yourself.

Good luck !

Re: Packaging and shipping turnings

#14

Keith Tompkins

Re: Packaging and shipping turnings

Keith Tompkins

>Double boxing is the secret...even if the outer box is crushed, the inside box is usually unharmed. Use plastic peanuts between boxes.