Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Stumbled Onto Gold Leaf Substitute

Posts

Stumbled Onto Gold Leaf Substitute

#1

Stumbled Onto Gold Leaf Substitute

charlie belden

>If you've ever tried to gold leaf anything with sharp edges or corners - or grooves - you know how much "fun" that can be.

And if you've substituted metallic spray paint for the gold leaf - and tried to do different colors adjacent to each other you know how much "fun" that can be - masking off areas - unmasking and remasking areas, . . .

I've been using Prisma Color Premier markers, the one with the fine tip on one end and a broad wedge on the other, on my last three Magic Wands - in very light maple. The results were pretty saturated colors - great for kids' wands but a little intense to an adult eye.

So for the oak wand I'm almost done with, the Prisma markers were too translucent to cover the oaks light brown. The results were BLAH.

What I needed was a white paint to cover the oak where I wanted to color with the markers. So off to the box with the dyes and airbrush paints where I found FASKCOLOR's Paint for Lexan - Faspearl White - a semi-opaque pearlescent water based airbrush paint.

Two coats of FasPearl White, half hour to dry, and started applying the Prismacolor - orange and yellow for "gold/"bronze", red and yellow for a "ruby", blue and purple for "saphire" and green and blue for "emerald". Now the idea of applying two colors of marker to an area seems like it wouldn't work - but Primsacolor has a "blending" marker that has the solvent for their color medium which lets you - blend colors - as the name implies.

The resulting effect looks quite a bit like "leafing" / "foiling". Oak, with its open grain, wasn't the best wood for this technique - but it hints at what can be done on a wood like maple.

Looks like I've got ANOTHER wand to turn to see if this idea pans out.

ps - the maker of FASKOLOR is - General Electric Company. Talk about diversification.


img

Re: Stumbled Onto Gold Leaf Substitute

#2

Katherine Kowalski

Re: Stumbled Onto Gold Leaf Substitute

Katherine Kowalski

>Very interesting effect -- thanks for posting.

Re: Stumbled Onto Gold Leaf Substitute

#3

Bigger better detail image *LINK*

charlie belden

>Got the Faskolor at a hobby shop. Airbrush on or brush on. For larger areas airbrush would be the way to go - but for smaller areas like on a wand, a brush works just fine.


Bottom of the page

Re: Stumbled Onto Gold Leaf Substitute

#4

No motion ------Wrong!

GalenV in Iowa

>Charlie

I thought this was one piece you did not include motion!

Then:

A wave of the wand in my direction.

A puff of smoke.

I tried to talk.

But the sound I produced was a croak like a frog!

My sister is raising her granddaughter and a wand would make a good gift. I'll have to try turning one when I turn back into my old self.

Galen

Re: Stumbled Onto Gold Leaf Substitute

#5

No motion? ------Wrong!

charlie belden

>ACTUALLY - this one DOES have a motion element - the captured ring. Moves when you pick up the wand or when you wave it about while casting a spell.

BUT - I didn't want it to make any noise when it moved - so I added silencers - almost a hundred of them - placed individually. I'm now fully qualified to do Hair Replacement For Men (and hey - I'm a client! NOT!)


img

Re: Stumbled Onto Gold Leaf Substitute

#6

Wrong Picture - again.

charlie belden

>Really should preview things before hitting Post Message Button.


img

Re: Stumbled Onto Gold Leaf Substitute

#7

Rub and Buff

Thomas Skaggs, Foothills of Mount Level

>Another good product for simulated metallic and gold leaf is called Rub and Buff. It is a wax based product and often used for picture frame repairs as it mimicks gold leaf so well.

Tom

Re: Stumbled Onto Gold Leaf Substitute

#8

Can't apply color over wax

charlie belden

>Cindy Drozda was using that "gold" wax in her inscirbed signature on dark wood turnings. Stays in the low areas, wipes off the high areas - popping the signature. Got a small tube of the stuff and it works ok on small areas - but will rub off.

The other problem with it is that you can't put color over it - like these translucent PrismaColor felt tips. The Fascolor perl white provides a pearlescent effect - without adding any color.

Re: Stumbled Onto Gold Leaf Substitute

#9

Re: Can't apply color over wax

john lucas

>Charlie it is a wax. I have had some luck over the years using Shellac to seal in various waxes before finishing. I have not tried to add color over the shellac. Dyes would probably not work but markers will. You might have to give it some bite by hitting it with 2,3 or 4/0 steel wool.