Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

And another thing: Is one coat of Watco enough?

Posts

And another thing: Is one coat of Watco enough?

#1

Steven Antonucci

And another thing: Is one coat of Watco enough?

steve antonucci

>I assume that Watco builds, and I have the look I want. If I make a second coat, will it soak into the first coat or build?

Probably do some light sanding in between if I do look at a second coat, but I don't want a "plastic looking finish". I made a small hall shelf in eye-popping curly cherry, and I am looking for a very natural finish, and I only expect moderate wear.

Do I need the second coat?

Steve

Re: And another thing: Is one coat of Watco enough?

#2

Re: And another thing: Is one coat of Watco enough

Mike Brazeau

>This reference is not for furniture, but Eugen Schlaak, a member of our guild and known to many here, and has sold endless numbers of bowls and other turnings, uses one coat of Watco routinely on his vessels and bowls. Eugen then buffs with Beall System. I have been using Watco for the past couple of years I have found the second coat doesn't do a whole lot more for appearance.

Re: And another thing: Is one coat of Watco enough?

#3

Re: And another thing: Is one coat of Watco enough

jwoodwright

>Steve,

We have a member who enlightened us on switching from Watco to Deft.

Deft Danish Oil penetrates very well and builds up nicely. The first just seems to be absorbed right into the wood. Leaves some shine and a hard surface. The next leaves a beautiful shine, the third is downright shiny. All Defy products work well and you can use an aerosol spray after for another layer.

I've used Watco for years and never was quite happy... Seemed to take too long to dry and never gave the finish I expected. I blamed myself.

Bought some Deft Danish Oil and was impressed with my first use. I had put some on scrap and I cut it in half the next day. Great penetration!

I used it on some peppermills and the finish was first class.

I'm impressed enough to recommend it to everyone... John

Re: And another thing: Is one coat of Watco enough?

#4

I use more than 1 coat

jake Niedling

>I always use about 3 coats of danish oil. I am not looking for a build up when I use this finish. Nor am I wanting to finish it in just a few days. It takes time for it to adequately dry. I rub it on the wood and keep it wet for about 10 minutes. Then I wipe off all the finish. Let it set and dry for 3 - 7 days. Usually the end grain will absorb it more than the side grain. I repeat this process about 2 more times. Then beall buff. I am looking for a more natural look and feel to the wood turning.

Re: And another thing: Is one coat of Watco enough?

#5

Steven Antonucci

Temporarily hanging with 2 coats.

steve antonucci

>I may do one more after I knock it down again. Looks pretty nice, trying to find hooks that I like.

Steve

Re: And another thing: Is one coat of Watco enough?

#6

Re: depends on the definition of ONE coat

Russ Fairfield

>.... the absorbancy of the wood, and how much gloss you want. It can take many coats of Watco to build a finish if the coats are light and the wood is porous. One very heavy application can be enough for a dense wood.

Re: And another thing: Is one coat of Watco enough?

#7

Lyle Jamieson

Re: And another thing: Is one coat of Watco enough

Lyle Jamieson

>I have been using Watco for decades. I guess because I know its properties. It is almost the only finish I use for my bowls or torso sculptures, unless I am in a hurry. I wipe/slosh it on and in just a few minutes wipe it all off. The cure time is slower then many products. So you have to wait a week til the first coat cures deep in the pores of the wood. If you put a second coat on too fast the second coat will soften the first coat and extend the cure time. The more coats the longer the cure time. A month later you can still smell the solvent smell of uncured finish. After a week the second coat will build up a more consistant luster, but still wipe it off after each application. If you want a plastic coating on the surface use a different faster curing product. If you are going to buff it one or two coats is all you need. If you want a soft flat or satin sheen put a few more coats on to biuld up a very light and uniform coating. The second/third coats can be put on a day or two apart cause the first coat has had a chance to cure and seal up the wood. Still rub off the wet oil after each coat.

Re: And another thing: Is one coat of Watco enough?

#8

A coat of lacquer sealer

Jerry Hall------WebKitFormBoundarya+xlLEfmA8pP6qz8

>50-50 or so gloss to thinner,wiped down, for me seems to speed build up of Watco and cut down on seemingly endless end grain absorption in some cases. Anybody else do this?

Re: And another thing: Is one coat of Watco enough?

#9

Re: A coat of lacquer sealer *LINK*

Russ Fairfield

>Do it all the time and for good reason - it prevents blotching with the oil finish by filling the end grain,


Oil and Varnish Finishes Over Deft Lacquer.