Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Removing Printing from PVC pipe

Posts

Removing Printing from PVC pipe

#1

Removing Printing from PVC pipe

Tom Vensel

>Good Morning , I recently found a nice woodturning tool rack plan at woodturningonline.com that uses pvc pipe to hold woodturning tools .I need a new one and like this ones design . Is their any easy way to remove the printing thats on the pipe ? PVC pipe cleaner ,that blue stuff, will take it off but it leaves a blue smeary mess behind .So far I have tried WD 40 and denatured alcohol with no sucess . The rack would look much nicer without the printing . Thanks in advance, Tom Vensel in S/E Ohio

Re: Removing Printing from PVC pipe

#2

JL

Acetone...

JL

>Put some on a rag or shop towel. Wipe quickly. Use repeated applications. Ethyl acetate works better but is more expensive. Don't leave it sit on the PVC.

Re: Removing Printing from PVC pipe

#3

Re: Removing Printing from PVC pipe

Ricc Havens

>try aerosol brake parts cleaner or acetone.

Re: Removing Printing from PVC pipe

#4

Sandpaper

Don Orr

>

Re: Removing Printing from PVC pipe

#5

Lacquer Thinner

Ron Bauman

>

Re: Removing Printing from PVC pipe

#6

Dick Hines

Re: Acetone...

Dick Hines

>Why go to all that trouble? I made a rack 6 years ago and the printing is still on the PVC. It still holds the tools OK

Re: Removing Printing from PVC pipe

#7

A can of spray paint works!

Dave Anderson (PacNW)

>

Re: Removing Printing from PVC pipe

#8

Stupid nube question...

Scott Burr in Ben Lomond CA

>Turn or sand it off? With a lathe, seems to me that it could happen very fast...

Re: Removing Printing from PVC pipe

#9

Re: Removing Printing from PVC pipe

Barry Irby

>They make clear Pipe Cleaner also. Just like the purple stuff, without the purple. I know this because I dribbled the purple stuff on a fiberglass bathtub. Nearly had a heart attack. Then someone told me about the clear stuff at Lowe's. Wiped the purple right off. (Probably acetone, but it saved my butt.)

Re: Removing Printing from PVC pipe

#10

Re: Removing Printing from PVC pipe

Larry In Lima

>I use the thin clear cleaner, takes the writing right off, doesn't leave ANYTHING behind. HTH Larry