Re: Christmas ornament proportions?
Dick Coers
>I start with a 6" long, 3/4" dia dowel that I make myself. (3/4 square stock a couple feet on, 4 passes on a router table with a 3/8" roundover bit.) On that I glue a 2" square that is 1 3/4 tall. I locate that 1 1/2" from the top of the dowel. To do that I drill an oversize hole in a 2x4, place the block on the 2x4 with the 3/4" hole over the oversize hole, and tap in the dowel untill it hits the bench. Then everything gets turned and I shoot for an elliptical shape on the sphere, and whatever shape on the finial. I have always made the statement that I can't get an extra quarter for a hollow ornament, so the sphere is solid.