Thanks to Bill Grumbine
Harvey Meyer in Atlanta
>Here they are Bill, as promised.
A few weeks ago, Bill demonstrated at Turning Southern Style, GAW's annual symposium in Helen, GA. One of Bill's demos was on coring with the McNaughton system. Prior to the demo, I asked Bill if he would let me core one during his demo. You see, I hated this tool and I figured if I couldn't get it right with Bill standing over my shoulder (making rabbit ears over my head), I would never get it right. I was the camera operator for Bill's demo and after he started the first core, he handed it over to me. While I don't think I really learned anything I didn't already know from watching the videos, something must have finally set in my thick skull. Maybe I just wasn't pushing hard enough. Maybe it was how Bill coaxed me on when the tool stopped cutting. So today, after finally feeling strong enough to do something after being down with the flu, I took a large piece of ambrosia maple and cored the living daylights out of it.
End result is 4 bowls - 15", 11", 8" and 5.5". All with even thickness, no funnels, no swearing, a small pile of shavings instead of a mountain of shavings and time elapsed from start to finish - only 2 hours and that includes roughing the big bowl. That beat my previous time by 5+ hours and I got all 4 bowls instead of making funnels.
So Bill, I don't know what you did or how you did it, maybe it was the rabbit ears or maybe you waved a magic wand over me while you were standing there. Now I have to see if I can do it again, or if it was just dumb luck. Thank you a thousand times for letting me have 5 minutes of your demo and for taking the risk of having me ruin your demo:-)
Harvey



