falling, falling, into commercialism
Mike Jones in Redding, Ca.
>Background: I began turning before there was internet, multi media, or a local club to help. All my (early) learning came from slick books and magazines from Barnes and Noble. Many of my "teachers" from these sources happened to be from "the old country" and, "from the old school". (What a no-no to refine a shape with abrasives!)
My father was a tradesman that came up from the old school as well, and I had many of the old school cliches hammered into me as a young man. to this, add that I am, in life, attracted to ancient zen, sufi,and Asian respect for beauty. Yes, Wabi-Sabi is sometimes a part of my work if you know what you are looking for.
It should be no surprise then, that my work on the lathe for many, many years tended to strive always for perfection...(NEVER achieved)..
And I tended to be rather critical of my fellow turners that displayed
works with tool marks, sanding scrathes, tear-out, chuck divots, etc, etc, etc,.
About four months ago, I stepped out of my up-tight mind set, by realizing that buyers, at least the tourist buyers and local homemaker buyers...seemed to give a rat's patootie about almost all of that "old school" do it the time honored way...15 layers of pure tungoil method. Etc., etc. Often buyers had little sense about "how good the piece was" but fussed instead over it's possible fit in Aunt Matilda's Armoire.
I have been released, in a way, from my own narrow thinking. Turning to sell...specifically to sell, requires a keener sense of time/motion efficiencies...there will be a point when you must stop with the finish fanaticism, stop with the jewelers loupe scoping for 1200 scratches, and a time to put it on the shelf.
If I were to teach a class today, I would require my students to plan a project that would utilise Bondo and body file....that would have broke me of sucking eggs I'll bet!!
You comments please!
Mike



