Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Identify and use hundreds of woods

It Takes Me About A Year . . .

Posts

It Takes Me About A Year . . .

#1

It Takes Me About A Year . . .

charlie belden

>to forget why I don't turn much green wood - even if it was cut a month or two ago - from a supposedly dead tree. And it also takes about a year to forget why I don't turn punky wood.

My oldest pseudo-adoptee - now 28 - was thoughtful enough to bring me a 4 1/2" thick by about 26" acrossed slice of an oak tree from the ranch on which she lives (they raise sheep - and harvest only the wood - not a bad deal for the sheep). I promised her a bowl from this chunk of wood - and a promise is a promise - especially to one of your kids, pseudo-adopted or not, kid or not.

Turn a rough outside shape.

Super glue the hell out of all the punky areas.

Refine the outside shape.

Super glue the hell out of all the punky spots.

Sand the outside shape - and knock of some punky "stabilized" wood on the rim.

Return the outside shape.

Super glue the hell out of all the punky spots.

Sand the outside shape - very carefully.

Start on the inside - after applying a BUNCH of MinWax Hardener - three times.

Turn the inside some.

Apply more hardener - and wait.

Turn the inside some.

Apply a LOT more hardener - and wait - a LOT longer.

Turn the inside some more.

Apply a LOT more hardener - and wait - a LOT longer.

Rim starts warping to the point where you can't get anywhere even close to it with a gouge - or even the MiniMonster.

TRY and turn some more on the inside - but only near the bottom since everything else is now WAY out of round - and the wall thickness leaves no room for fixing.

Go back to THICK super glueing the punky areas - and wait (slow cure thick CA glue).

Now I've got this tear drop shaped rim bowl - that's STILL wet.

So I give it 20 seconds in the microwave - 10 minutes of resting and recupertating outside the microwave, followed by 30 seconds of microwaving. Now 15 minutes later, what I'd thought was a line of spalting (the source of all that punky wood) - was in fact - a very small, invisible in fact, crack - in the bottom of the bowl - which is NOW quite visible.

OH CRANUS! Never - ever - ever - turn green wood again! ( should write the date on the wall next to the lathe and in about a year remember to notice that date).

So about $15 worth of CA glue and another $10 worth of wood hardener later - I've got a spalted oak bowl - with a tear drop shaped rim - and a couple of cracks in the bottom - for my oldest "adoptee". I can fill the cracks in the bottom so they won't be noticable - the rim - well there's no fixing that - or the notches in the outside of the rim that came about in some mysterious way (I'm suspecting Punky Wood as the cause).

Fortunately, Marie loves things that are different so all in all this bowl is priceless (and I don't mean that as something no one would pay good money for, but rather a piece turned from a chunk of wood given to an "adopted dad" - who made something for the daughter who thought enough to give the wood to him in the first place.)

But THIS is the LAST green punky wood I'll turn. Swear to god. Honest! (got to do something about this memory loss thing).

Re: It Takes Me About A Year . . .

#2

PS: Bob Rosand's T-Shirt - Life's Too Short . . .

charlie belden

>To Turn Crappy Wood!

Got to get me one of them T-shirts.

Re: It Takes Me About A Year . . .

#3

See Ruth *LINK*

Doug Thompson near Cleveland

>Get one from her so you never forget... not that you ever will.


Life's to short... Tee shirt

Re: It Takes Me About A Year . . .

#4

That's a John Jordan quote-sorta

john lucas

>John prefers to make the statement a little more blunt and to the point so they cleaned it up for Ruth's T shirt.

Re: It Takes Me About A Year . . .

#5

Jesper, Denmark

Re: Talking of slogans on Tee-shirts.....

Jesper, Denmark

>This one got me the giggles:

Everybody has to believe in something!

I believe I will have another Beer!

Re: It Takes Me About A Year . . .

#6

Re: It Takes Me About A Year . . .

Barry Elder

>Since I have been known to turn much punky wood (can't afford whatever the "good" stuff is) I decided to try epoxy resin since I used to coat fishing rods with the stuff. I called a local resin business and he fixed me up with a 2 to 1 resin/hardener kit that he guaranteed wouldn't blush and would be water clear. So, I finally finished the punky bowl and mixed the resin and thinned it quite a bit with Xylol and applied it with a brush. Scared me half to death! Have you ever heard wood go Sllluuuuuurrrrrrppppp?!!! That bowl absorbed about a pint of "resin" as fast as I could put it on!! So, now, two years later, I am finishing that bowl which is a joy to look at and to finish! So don't worry about super glue and wood hardener, just mix up a batch of resin, thin it a little, and let nature take its course.

Re: It Takes Me About A Year . . .

#7

Re: Talking of slogans on Tee-shirts.....

Don at Central Illinois

>Years and years ago the people I work with bought me a sweat shirt with that saying on it. One of them say it and immediately thought of me. Don't know why.

Re: It Takes Me About A Year . . .

#8

Very interesting Barry,

Jorge Castaneda~Downeast Maine

>what make of resin?

and how did you thin it?

I have a few very nice shapes on not so good wood and would like to complete them.

Thanks

Jorge