Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

cameras for demonstrations

Posts

cameras for demonstrations

#1

cameras for demonstrations

Charles Watson------WebKitFormBoundary+ATeQdvhmFc4

>Anyone know of a good source for an overhead mount mini camera that would be good for turning demonstrations?

Re: cameras for demonstrations

#2

Re: If you're looking for the tiny ....

Jamie Donaldson

>....chip cameras such as the ones we are using now at the AAW Symposium, the source is 123cctv.com and cost about $86 last time I checked.

Re: cameras for demonstrations

#3

Lyle Jamieson

Re: cameras for demonstrations

Lyle Jamieson

>From a demonstrators perspective these are not a good idea. I have done demonstrations all over the country with them, and I cringe every time. They can not be set up to get the right angle or scale. They often are not in focus. They dont project well. The colors are distorted. They get in the way. Dont waste your time and money. The bad news is the viewers can not see or understand what is going on with the demo. I battled this issue with my own local club when they purchased three of these little stationary cameras. Two out of three are broken after a couple years, and we went back to the movie camera on a tripod because of the complaints that they could not see the action as well.

Get a simple movie camera with a zoom on a tripod and hook it up to a TV monitor. (The projected images on a screen require dim lighting and the dim lighting will not get the picture needed to see the action.) I direct the camra person to the angle needed and get it zoomed in to see the hairs on my hand if I want. The bevel can be 2 feet accross on the TV monitor. The good news is the demonstrator can get the shot that will help him/her teach the subject at hand. The audience can see the action up close and from the most beneficial angles. The camera is always moving without getting in the way of the demonstrator or the viewer. In case you have not noticed, I have a very strong opinion about this. Sure it would be easier for me and the camra person to set the stationary camera up and sit down for a nap, but the people that suffer from this decision are the paid participants with poor views.

Re: cameras for demonstrations

#4

Re: cameras for demonstrations

john lucas

>I think they are wonderful. They do have to be set up properly. As a demonstrator and someone who runs the cameras a lot, it is impossible to get the hand held cameras into the right position to see the cut. Of course the camera really needs to be mounted on your glasses to be in the best position but obviously that won't work.

In our club we have a camera on a boom arm mounted above the lathe. The whole assembly is on a roller so it can be moved. One person in the front row of the audience will often move the camera for a better view. This works very well. Of course we do focus it and move it up and down for the proper magnification.

I think the placement of a camera above the work really helps the audience see what is happening. Couple that with a mobile camera with a good zoom and let the operator know that he is free to move about to get the best angle.

Most of all it's important for the demonstrator to work with the camera. This is hard to do because you want to talk to the people but you really have to concentrate on showing the camera what your doing and work with the operator. In my opinion the guy running the camera is the most important person in the club and should get huge thanks from everyone. It can make or break a demo.

Re: cameras for demonstrations

#5

Re: cameras for demonstrations

Charles Watson------WebKitFormBoundary+ATeQdvhmFc4

>These cameras would be used for woodturning classes where space is limited and frequently no one to operate a camera on a tripod. It seems a fixed camera(s) is the best option in this situation.

Re: cameras for demonstrations

#6

Re: cameras for demonstrations

Mike Brazeau

>This is taking the topic way beyond where do I find a camera, but this topic is huge. I agree with a lot of Lyle's comments as well as John's that follow. After starting with old full size VHS cameras and one TV in the 90's our Golden Horseshoe Guild, we have evolved to an overhead mini cam for events when the demonstrator is turning and a high quality digital camera on a roll around tripod, with an exceptional camera person. The principal camera is the rollaround, but overhead shots really clarify tool position for newbies. Not perfect, but benefitial. I do disagree with Lyle's comments on the screen however. A screen is much easier to store or perhaps not even needed if a suitable wall is there and provides an awesome display for the audience. Even though our screen is positioned under lights we can not switch off, I have never had a complaint about seeing the screen. We switched from two 26" TVs that none of us old farts could lift any more into an elevated position so people could see them, to a rear projection screen and Epsom projector, which easily switches from computer Power Point presentations to video. Power point is easily used for announcements at the beginning of the meeting or supplementary material the demonstrator wants to include. After two sets of el cheapo microphones, we are just investing in a higher quality Garth Brooks type microphone and receiver as well to improve audio performance. Obviously the size of your club and resulting budget and facilities you meet in are a factor. We happen to be extremely well blessed in both counts.

Re: cameras for demonstrations

#7

Re:I have revised and supervised...

Jamie Donaldson

>...video operations for the last 2 AAW Symposiums, and the 3 camera set-up we now use is very adequate with a skilled camera operator. Of course an unlimited budget for such visual aids would be nice, but we all have to work within our realities, and the 3 camera system I have refined is dependant on the cooperative interaction of cameraperson and demonstrator. The set-up and other details were published in the AAW Journal (Summer 2008 Vol.23 No.2) and are also available on the AAW website(woodturner.org) under the Chapter Best Practices topics. As with most everything, the operator is often the key ingredient in the mix rather than equipment.

Re: cameras for demonstrations

#8

Re:I have revised and supervised...

Greg in Oshkosh

>Our Group uses a Sony video camera above the demonstrator. This camera has a remote controlled zoom. It is mounted on an arm made from electrical conduit. This gives the option of an overhead view that you can zoom in on the turning to view tool work. We also use another video camera on a tripod and switch between them. I have been a video assistant at the symposiums and although that system is OK this is better. We project the image on a screen rather than use TVs and now all members can see the demos

Re: cameras for demonstrations

#9

Re: cameras for demonstrations

Bill Youngblood

>Right On John. Probably the best 'demonstrator to camera operator' I have ever seen is Richard Raffen. He watched the monitor as much as he watched what he was doing and made sure the camera saw everything. Also, when you are the camera operator, you don't get to watch the show. You MUST watch what's on the screen. That can make or break a demo. Thanks again John for all your efforts.

Re: cameras for demonstrations

#10

Re: cameras for demonstrations

Jeff Rich

>I think SuperCircuits has a camera built into a pair of glasses.

They have all sorts of security related devices.

We use them for covert operations, P.I. and insurance investigator stuff.