Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Unique coloration?

Posts

Unique coloration?

#1

Unique coloration?

Mike Jones in Redding, Ca.

>AS Charlie Belden asked recently about "proto-typers" I often experiment and attempt to do something that I have not seen before in woodturning books, online galleries, or magazines.

Below is a picture of an otherwise pretty ordinary oak pitcher. The log came from a woodcutters pile, and was destined for a fireplace. The turned and sanded piece showed promise with some interesting grain, but short of a stain (which I did not want) the figure didn't show well.

I put the piece in my fish smoker...the Lil' Chief cheap-o smoker... and smoked it for about 20 hours. The picher began to take on a warm glow from the smoke at around 10 hours. The depth of color is easily controlled, and the color will not rub off. (Won't even buff off!)

Wish I had done a before-and-after for you to see the remarkable difference!


img

Re: Unique coloration?

#2

Ric Taylor

Re: Unique coloration?

Ric Taylor

>Mike,

Do you know what the temperature was in the smoker? I would think there would be risk of cracking the wood if the temp was too warm.

If this went into the smoker after sanding, did you put a finish on top after the smoking?

Ric

Re: Unique coloration?

#3

Re: Unique coloration?

charlie belden

>Liming, ammonia fuming, chemical patination, scortching, pyrography, charring, vaporizing - but I'd have never thought of trying a smoker.

Interesting idea using the smoke of smoldering wood to color another piece of wood. Could have some interesting possibilities - beyond the one you've discovered. Different wood for the smoker and you may get a different result in the smokee. You noted that the resulting color doesn't wipe or sand off so whatever is going on is penetrating. Could be that low heat, in a reducing atmosphere (smoke captures oxygen before it gets to the piece) for 10 or 12 hours may be causing changes in the chemicals in the wood that wouldn't take place under "normal" conditions.

Start taking notes and keeping records - the rest of us might benefit from ; )

Given the trend - it's going to get harder and harder to come up with Wild Hare Ideas.

BTW - nice pitcher. How about a larger image?

Re: Unique coloration?

#4

Re: Unique coloration?

Steve Harder

>I have one of those smoker boxes - they get warm enough to bring a cold slice of meat to 160 deg F in about an hour. I've never measured the temp of the air inside the box but would guess something a little above 200 deg F. It's a 1200W coil heater at the bottom of a thin wall metal box with about 5 cu ft of interior space.

This is very interesting, will have to give it a try. Will say it will take some good finish to cover up the smoky smell - I always have to take a shower after a session of smoking meat so I can stand to be around myself.

Re: Unique coloration?

#5

Re: Unique coloration?

Steve Harder

>And Mike - were you feeding new smoker chips in for 20hrs - that would take a lot of chips.

Is it possible that just the heat soaking caused part of the coloration change?

Re: Unique coloration?

#6

Re: Unique coloration?

Mike Jones in Redding, Ca.

>I used the chips from the work piece, and that, I believe was around 15% mc. I don't leave the heating element on. (The fish get too dry.:) Just long enough mto get the chips to smoldering.

I wouldn't think that I got the piece very hot, though I did not use a thermometer. My guess is that the coloration comes from the tannins in the oak smoke.

The purpose of my experiment, and the results, were to get the piece darkened, make the grain pop a bit, and not have the very dark end grain from a stain.

The smoky odor lasted about a week, and I finished it with one coat of oil/varnish.

Re: Unique coloration?

#7

Re: Unique coloration?

Cyril Griesbach

>Mike, an excellent and successful experiment as well at a very nice pitcher. Thanks for sharing.

FWIW...smoking can be either a cold or warm process.