Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Drill press adapted for indexed holes

Posts

Drill press adapted for indexed holes

#1

Drill press adapted for indexed holes

jim Shewan

>A simple adaption of an old drill press to drill accurate indexed holes. I think the pic says it all.


img

Re: Drill press adapted for indexed holes

#2

Re: Drill press adapted for indexed holes

john lucas

>That's quite a rig. I just use a square block of wood with a hole for the drill bit on one end and turned shank that fits my banjo. I thought I had a photo but don't see it. I drill 2 holes in one side and one hole in the other so I can use 3 different size drill bits. It's amazing how long these things last before they need to be replaced. It takes all of 5 minutes to make one.

Re: Drill press adapted for indexed holes

#3

Re: Drill press adapted for indexed holes

Eduardo Sarmiento-Hall

>I have a similar set up but with the mini drill press on the lathe it self pict will be posted soon,thanks