Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Vacuum Coupling for Nova DVR

Posts

Vacuum Coupling for Nova DVR

#1

Vacuum Coupling for Nova DVR

Ken George

>My vacuum coupling has bit the dust! The Teknatool site indicates that this is now "out of production" and the few woodturning sites I visited don't show them or show out of stock.

Anyone have one you would like to sell or trade/barter for?

Thanks,

Ken

Re: Vacuum Coupling for Nova DVR

#2

Re: Vacuum Coupling for Nova DVR

ThomSayles

>Got one sitting in my hands. Kinda worse for wear, bearing scratchy. I switched to a oneway adaptor and have had no problems what so ever and can pull a lot of vaccuum. My advice is to go that way. I have a DVR just like you. I will try to email you directly and not use this space for a transaction. We can trade maybe for some wood.

Re: Vacuum Coupling for Nova DVR

#3

Mike Mills

Re: Vacuum Coupling for Nova DVR

Mike Mills

>Just in case other Nova owners are not aware of this site...

To join the Nova Owners Group on MyFamily.com you must send an email to novauser1@att.net and they will send you a password. Or go to this site and use the link there http://www.teknatool.com/NOVA_Owner.htm

The new site is not as active as it was when there was a direct link from the Teknatool web site but there is still a lot of good info(the site changed when MSN closed all it's groups).

Mike

Re: Vacuum Coupling for Nova DVR

#4

Woodcraft? *LINK*

Curly Smith

>I don't know if it's the same or not but:


Vacuum Adapter for Handwheel

Re: Vacuum Coupling for Nova DVR

#5

Re: Woodcraft?

Barry Irby

>I made mine. Bought a sealed bearing like the one shown in the WoodCraft Catalog at a local bearing house. Apparently its a very common size. As I recall it was about $10 or 15. Then I used brass plumbing parts I bought at the borg to contrive a connection tot eh bearing. I put the threaded plumbing part in my chuck and filed it down to the correct size to fit in the bearing and epoxied it in. From there it was easy. Just cobbled together fittings for a vacuum pressure gauge and a bleeder valve and the connection for the vacuum pump. It was easy, but I like scraping things together.

Re: Vacuum Coupling for Nova DVR

#6

Re: Woodcraft?

Ken George

>Thanks all for the responses. I have been contacted by people off line that have used adaptors that they are willing to trade.

Ken

Re: Vacuum Coupling for Nova DVR

#7

Re: Vacuum Coupling for Nova DVR

Walter Ahlgrim

>Please note this vacuum adaptor was designed for use with a shop vac at 5 Hg not a vacuum pump at 25Hg. If the bearing leaks not a problem for a shop vac but it�s a big problem for small vacuum pumps. Mine works ok but I have a big vacuum pump.

If you have one with a bad bearing you could replace the bearing. My uses a 6004LB

Try Lynn at Accurate Bearing 800 323-6548.

Walta

Re: Vacuum Coupling for Nova DVR

#8

Re: Vacuum Coupling for Nova DVR

Carole Valentine

>Made mine (with a little (lot) of help from my friends, and it works great. No through rod necessary. If you search the archives for vacuum pump you will find some long threads.


img

Re: Vacuum Coupling for Nova DVR

#9

Re: Vacuum Coupling for Nova DVR 

Carole Valentine

>


img